SEGGER - Fabian Administrator
- Member since Aug 30th 2019
- Last Activity
- , Reading thread [ABANDONED] Constant GDB server fail at address 0xDEADBEEE with IAR branded J-Link
This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.
-
SEGGER - Fabian -
Replied to the thread [SOLVED] Project auto-update.
PostHi, sorry for the delay in response. 0x0800_0000 and 0x0C00_0000 describe the same physical flash area. The first is cached the latter is uncached. When programming data to 0x0800_0000, it is remapped internally to 0x0C00_0000 by J-Link, which was… -
SEGGER - Fabian -
Replied to the thread [SOLVED] (Find IC's Name) Unable to communicate between the computer and J-link Plus Compact.
PostHi, sorry for the delay in response. Even though it is probably not required anymore, please find the answer below: In general we recommend to make use of our trade-in program in such a case: segger.com/purchase/trade-in-program/ The damaged part is an… -
SEGGER - Fabian -
Replied to the thread [SOLVED] JLink Ultra+ flashing problems with S32K144W.
PostHi, Even though the thread is quite old, an answer to the question can be found here: wiki.segger.com/S32Kxxx#Readout_protection_of_internal_flash BR Fabian -
SEGGER - Fabian -
Replied to the thread [SOLVED] What does "Force go on connect" do in RTT Viewer?.
PostHi, We updated the wiki-page. The "Force go on connect" option is now explained: wiki.segger.com/J-Link_RTT_Viewer#Force_Go_on_Connect Does this answer your question? BR Fabian -
SEGGER - Fabian -
Replied to the thread Microchip PIC32MK Support.
PostHi tsche, Unfortunately, we had to postpone the implementation of PIC32MK support.It is still on our list of feature requests, but without definitive timeline. MIPS is not our core business, so we cannot prioritize this, unfortunately. Best… -
SEGGER - Fabian -
Replied to the thread [SOLVED] Segger RTT via Telnet.
PostHi Peter, No worries! Best regards Fabian -
SEGGER - Fabian -
Replied to the thread [SOLVED] Segger RTT via Telnet.
PostHi Peter, Quote from hotbrix: “As far I understand you, there is no way around this. I need the perma connection to stay open in order to be able to connect to the server. ” This is correct. As long as you want to use RTT, you will have to have an… -
SEGGER - Fabian -
Replied to the thread Microchip PIC32MK Support.
PostHi tsche, Could you please send us a picture of the front and the back of you J-Link for support purposes? BR Fabian -
SEGGER - Fabian -
Replied to the thread [SOLVED] How to skip flash erase.
PostHi Peter, it seems like you misinterpreted what "SetCompareMode=0" does. This is not really a surprise as it was not properly documented. We will revisit the documentation an adjust this. In short: When SetCompareMode=0 is selected, the J-Link will skip… -
SEGGER - Fabian -
Replied to the thread J-Link Not connecting to Target Board.
PostHi, A good way to approach such an issue is usually the following troubleshooting guide: wiki.segger.com/J-Link_cannot_…the_CPU#Target_connection Additional hints: 1) The STM32F4 devices allow to set permanent protection (RDP level 2), which will… -
SEGGER - Fabian -
Replied to the thread [SOLVED] Segger RTT via Telnet.
PostHi Peter, First of all: As Alex pointed out, an active debug connection is mandatory for RTT to work. If you are wondering why, please refer to the following article: wiki.segger.com/RTT This does not change regardless of how you retrieve the data (via… -
SEGGER - Fabian -
Replied to the thread JLinkExe update software popup.
PostHi Pierre, sorry for the delay in response. The issue you described was already fixed with V7.92l: While the update notification pop-up was visible, other dialogs (e.g. flash programming dialog) would not be shown until the pop-up was closed. Fixed. I… -
SEGGER - Fabian -
Replied to the thread JLinkExe update software popup.
PostHi Pierre, The update notification dialog should be non-blocking, so it should not interrupt your script execution. Could you please tell us a little bit more about your setup, so we can investigate this? 1) Which J-Link Software version are you…