SEGGER - Fabian Administrator

  • Member since Aug 30th 2019
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • SEGGER - Fabian -

    Replied to the thread Linker fails with "No such file or directory" error on Ubuntu 20.04.

    Post
    Hi, Thank you for your inquiry. As you already said, wildcards expansion is done by the Shell. Embedded Studio (ES) does not support this feature, as it is usually not required. ES writes all Input files for the linke (Compiler Outputs (.o) and…
  • SEGGER - Fabian -

    Replied to the thread [SOLVED] Does SES support stack check like GCC "fstack-check"?.

    Post
    Hi Han, yes you can if you selected gcc as compiler (project options) and specify -fstack-check as an "Additional C/C++ Compiler Option" (project options) Clang and SEGGER-CC do not support this feature. Does this answer your question? Best…
  • SEGGER - Fabian -

    Replied to the thread [SOLVED] LPC4088 SPIFI external flash memory via J-Flash?.

    Post
    Hi, Good to hear that everything is working as expected now. We will close this thread now. Best regards, Fabian
  • SEGGER - Fabian -

    Replied to the thread [SOLVED] LPC4088 SPIFI external flash memory via J-Flash?.

    Post
    Hi, Thank you for your inquiry. You are using an over 3-year-old and very outdated version of the J-Link Software and Documentation pack. Could you please download the latest version and try again?
  • SEGGER - Fabian -

    Replied to the thread [SOLVED] JLink with NXP IMXRT106x and modified flexRAM.

    Post
    Hi Nick, I can see that you also contacted us via the support ticket system. Therefore I will close this thread here to keep communication to one channel. Could you please keep to one channel for future requests? Otherwise, this increases our workload,…
  • SEGGER - Fabian -

    Replied to the thread [SOLVED] JLink with NXP IMXRT106x and modified flexRAM.

    Post
    Hi, Thank you for your inquiry. You would have to reconfigure the device to apply to the requirements. The best way to do so depends on the Tools you are using. Examples: 1) J-Flash: The Init. steps (Project Settings > MCU > Init. steps) provide a…
  • SEGGER - Fabian -

    Replied to the thread JLINK EDU - Flash SPI.

    Post
    Hi, Thank you for your inquiry. Unfortunately not. J-Flash and J-Flash SPI are professional production utilities. From the concept of an educational/non-commercial probe, providing a license to use a production utility would not make much sense. Best…
  • SEGGER - Fabian -

    Replied to the thread [DUPLICATE] Long standing problem on MacOS.

    Post
    Hi Thomas, Yes, we are able to reproduce this on our side. We will fix this issue as soon as possible. Best regards, Fabian
  • SEGGER - Fabian -

    Replied to the thread J-Link Emulator for AM437x in CCS (TI).

    Post
    Hi Bernd, We implemented Cortex-A9 support for the J-Link CCS Plugin. A new version containing this feature is planned to be released sometime next week. Best regards, Fabian
  • Hi, As you also contacted us via the Support Ticket system, I will close this thread now. Could you please keep all further inquiries to one channel of communication? Otherwise, this may lead to - a higher work load on our side, resulting in longer…
  • SEGGER - Fabian -

    Replied to the thread Jlink commander scripting.

    Post
    Hi LT, Quote from catosh: “Still the issue of maintaining the code in our repository ” This would also be the case when using a commander script, wouldn't it? Either way, I am sure that you will find a way that will suite your project. Do you have…
  • SEGGER - Fabian -

    Replied to the thread ConfigTargetSettings for RV32 core.

    Post
    Hi, Thank you for your inquiry. Could you please provide us with some more information? 1) What is the SN of the J-Link you are using? 2) Which J-Link Software version are you using? 3) Are you working on an evaluation board or custom hardware? If…
  • SEGGER - Fabian -

    Replied to the thread JLink EDU Unable to communicate with nrf51802.

    Post
    Hi, Did you check the cables / connection on another PC? This does not look like an issue with the connect sequence but setup related, especially since we did not receive a single other report about such an issue. Best regards, Fabian
  • SEGGER - Fabian -

    Replied to the thread [SOLVED] Data breakpoints data mask.

    Post
    Hi everyone, Quick follow up. We just implemented this feature for the J-Link Web Control panel. It will be available in the next beta release and in the next full release (V7.56). Best regards, Fabian
  • SEGGER - Fabian -

    Replied to the thread [SOLVED] step over isr.

    Post
    Hi Rob, Thank you for your inquiry. Unfortunately, we do not yet provide such an option. I forwarded this to the Ozone department and they put it on the Wishlist. So this option will be added in the future, but we cannot provide a timeline for when it…
  • SEGGER - Fabian -

    Replied to the thread TargetInterface.

    Post
    Hi, We are not quite sure what the issue is here. The function you mention should be available. Could you please provide more detailed information and send us screenshots of the error messages if you receive any? Best regards, Fabian
  • Hi Andreas, Thank you for your inquiry. It is possible to explicitly set the connect mode in the OnProjectLoad() function of the project: Debug.SetConnectMode( CM_ATTACH_HALT ); Does this answer your question? Best regards, Fabian
  • SEGGER - Fabian -

    Replied to the thread [SOLVED] Post mortem readout not working (SV 3.30).

    Post
    Hi, As you also contacted us via the Ticket System, we will close this thread to keep communication to one channel. Best regards, Fabian
  • SEGGER - Fabian -

    Replied to the thread Cannot step/resume on sw bkpt , Cortex-R4/5, TMS570.

    Post
    Hi, We will look into this and check if there is something wrong with the current handling of breakpoints. Regarding command strings in J-Link Script files: Yes. This is also mentioned in the same article: Using J-Link Command Strings Script file API…
  • SEGGER - Fabian -

    Replied to the thread [SOLVED] Segger Linux studio : why .. ?.

    Post
    Hi, Thank you for your inquiry. You can find the difference in this article (first link when googling "SEGGER Linux Studio"). You will see that SEGGER Linux Studio as a host IDE for Linux application development. It is not designed for embedded