rabbitlennon Beginner

  • Member since Jul 13th 2019
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • rabbitlennon -

    Replied to the thread Jtrace on NuMaker PFM-M2351.

    Post
    Thank you very much!
  • rabbitlennon -

    Posted the thread Jtrace on NuMaker PFM-M2351.

    Thread
    Hi there, Can I know if JTrace can support the NuMaker PFM-M2351 board out-out-box? The board has a cortex debug+ interface, but I didn't find information on the tested device page (segger.com/products/debug-prob…echnology/tested-devices/).
  • rabbitlennon -

    Replied to the thread ETM on LPC55S69 EVK board.

    Post
    Thank you Nino. You are really helpful.
  • rabbitlennon -

    Replied to the thread ETM on LPC55S69 EVK board.

    Post
    Currently, Ozone reported the following coresight components: CoreSight components: ROMTbl[0] @ E00FE000 ROMTbl[0][0]: E00FF000, CID: B105100D, PID: 000BB4C9 ROM Table ROMTbl[1] @ E00FF000 ROMTbl[1][0]: E000E000, CID: B105900D, PID: 000BBD21…
  • rabbitlennon -

    Posted the thread ETM on LPC55S69 EVK board.

    Thread
    Hi there, I have a LPC55S69 EVK board and wanted to use the Jtrace to get the instruction trace. Since no trace pin is available on the board, I thought setting trace source to be "trace buffer" should work. Unfortunately, it is not allowed in OZone. I…