VikramUpparpalli Beginner

  • Member since Oct 16th 2018
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • VikramUpparpalli -

    Replied to the thread JFlash Cypress PSoC Protection.

    Post
    Quote from SEGGER - Nino: “Which J-Link software version are you using when trying to unlock? ” v6.46 Quote from SEGGER - Nino: “Do you get an unlock pop up when using the latest J-Link software version and does selecting yes unlock the…
  • VikramUpparpalli -

    Replied to the thread JFlash Cypress PSoC Protection.

    Post
    It is PSoC4. The chip is CY8C4127XXX-SXXX. I have talked to cypress contacts, they havent had support for doing anything at all with JLink. I have tried setting the Unlock sequence in the init sequences, but was never able to do it.
  • VikramUpparpalli -

    Posted the thread JLink wont connect to i.MX6UL EVK.

    Thread
    I have been trying to debug my i.MX6UL_EVK board using JLink. I am getting following error log Source Code (42 lines)I have followed the link : wiki.segger.com/IMX6UL-EVK to enable JTAG debugging. my ddr_init.jlinkscript looks like this : Brainfuck…
  • VikramUpparpalli -

    Posted the thread JFlash Cypress PSoC Protection.

    Thread
    I am working to enable the readout protection on the cypress chips. I was able to secure the cypress chips using the psoc programmer. The factory here uses JFlash utility to enable the readout protection on the psoc chips, I was able to secure the chip…
  • VikramUpparpalli -

    Posted the thread [SOLVED] JFlash License.

    Thread
    Hello My JLink serial number is 50120405. I need a JFlash License Key (Trial Version is fine for now). I need to test the ability to secure a cypress chip which needs system call commands from JFlash utility. Please provide me a trial version of the…