MikeZ Beginner

  • Member since May 13th 2018
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • MikeZ -

    Replied to the thread Multiple windows or multipage.

    Post
    Hi Sven, Thanks, I will check it out. MikeZ
  • MikeZ -

    Replied to the thread Multiple windows or multipage.

    Post
    Hi Sven, Thanks for responding. I am using the STM32F429IIT6 attached to 8MB of SDRAM with a LCD OF resolution of 480x272, I am driving the RGB (8-bit) lines directly, as well as the VSYNC, HSYNC, DCLK AND DE. Thanks MikeZ
  • MikeZ -

    Replied to the thread Multiple windows or multipage.

    Post
    Hi Sven, Thanks for your reply, I will look into the areas you suggest. The LCD has a resolution pf 480x272 and 8MB of SDRAM is available, so multibuffering should be possible. A question about GUIBuilder please, with Multipage, must I first place…
  • MikeZ -

    Posted the thread Multiple windows or multipage.

    Thread
    Hi, I have an application which require at least six windows. I did some tests initial tests opening closing windows triggered by external touch buttons using GUI_StoreKeyMsg(), it worked fine, but you could just make out the screen changes…
  • MikeZ -

    Replied to the thread custom touch panel with touch buttons - error in last post.

    Post
    Hi Sven/technical support, Thinking about it further, in my touch screen controller code, where I pass information to (GUI_PID)_STATE TS_State, can I assign an arbitrary code to the custom touch button detect (via it's coordinate) and send it to…
  • MikeZ -

    Replied to the thread custom touch panel with touch buttons - error in last post.

    Post
    Hi Swen, I am finally working on the screen I asked a question some months ago. Outside the area TFT area there are some touch buttons on the same touch surface as that on the TFT, the share same touch screen controller. I detect touches on the TFT…