MikeZ Beginner

  • Member since May 13th 2018
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • MikeZ -

    Replied to the thread creating a horizontally moving graphic object.

    Post
    Hi Sven, Thank you, I will check it out. Kind Regards MikeZ
  • MikeZ -

    Posted the thread creating a horizontally moving graphic object.

    Thread
    Hi All, Forgive the poor subject description, I have small bitmap image in a window, I would like to have arrow/marker (upside down V) below its lower edge, which under control could be made to position itself anywhere along that lower edge. Where do…
  • MikeZ -

    Replied to the thread No response to WM_KEY after change to window design.

    Post
    Hi Sven/All, I sorted out the problem, I had misunderstood the process of setting up a custom callback and all the steps involved. There is an excellent related example on the forum CloseDropdownOnEscape.c that is very helpful together with the relevant…
  • MikeZ -

    Replied to the thread No response to WM_KEY after change to window design.

    Post
    Hi Sven/All, Just to add little to my last message, it appears that the list box is not getting re-drawn incorrectly and appears blacked out , even so pressing one of the current external touch buttons the window changes to correct one in all cases. I…
  • MikeZ -

    Replied to the thread No response to WM_KEY after change to window design.

    Post
    Hi Sven, I tried and it works, but the Listbox comes out as black rectangle, am I also suppose add the contents of the Listbox specific parts from my original windows/Dialog callback function to the new custom Listbox callback function. Kind…
  • MikeZ -

    Replied to the thread No response to WM_KEY after change to window design.

    Post
    Hi Sven, Thanks for your response, I will try it out. I am very new to this type so still learning, the messages from the external touch buttons are to close the current window and open new one, what you are proposing is send to message to the Listview…
  • MikeZ -

    Replied to the thread No response to WM_KEY after change to window design.

    Post
    Hi Sven, I do not know how to manually unfocus the list box without the redundant Button, with the Button I can use the command BUTTON_SetFocussable() before sending the key messages, but it is not pretty. Is there an equivalent command for the…
  • MikeZ -

    Replied to the thread No response to WM_KEY after change to window design.

    Post
    Hi Sven, Thanks for your response. I had just added button which did nothing more than deselect the Listbox and program now worked as before, closing and opening a new window. I can alter the item selected in the Listbox, which I am doing with an…
  • MikeZ -

    Posted the thread No response to WM_KEY after change to window design.

    Thread
    Hi All, I have small program which has been working fine, it consists of 6 windows, whose opening and closing is controlled by custom touch buttons and using GUI_StoreKeyMsg. The windows now contain no buttons but listbox and text information …
  • MikeZ -

    Replied to the thread Multiple windows or multipage.

    Post
    Hi Sven, Thanks, I will check it out. MikeZ
  • MikeZ -

    Replied to the thread Multiple windows or multipage.

    Post
    Hi Sven, Thanks for responding. I am using the STM32F429IIT6 attached to 8MB of SDRAM with a LCD OF resolution of 480x272, I am driving the RGB (8-bit) lines directly, as well as the VSYNC, HSYNC, DCLK AND DE. Thanks MikeZ
  • MikeZ -

    Replied to the thread Multiple windows or multipage.

    Post
    Hi Sven, Thanks for your reply, I will look into the areas you suggest. The LCD has a resolution pf 480x272 and 8MB of SDRAM is available, so multibuffering should be possible. A question about GUIBuilder please, with Multipage, must I first place…
  • MikeZ -

    Posted the thread Multiple windows or multipage.

    Thread
    Hi, I have an application which require at least six windows. I did some tests initial tests opening closing windows triggered by external touch buttons using GUI_StoreKeyMsg(), it worked fine, but you could just make out the screen changes…
  • MikeZ -

    Replied to the thread custom touch panel with touch buttons - error in last post.

    Post
    Hi Sven/technical support, Thinking about it further, in my touch screen controller code, where I pass information to (GUI_PID)_STATE TS_State, can I assign an arbitrary code to the custom touch button detect (via it's coordinate) and send it to…
  • MikeZ -

    Replied to the thread custom touch panel with touch buttons - error in last post.

    Post
    Hi Swen, I am finally working on the screen I asked a question some months ago. Outside the area TFT area there are some touch buttons on the same touch surface as that on the TFT, the share same touch screen controller. I detect touches on the TFT…