Nevets Beginner

  • Member since Apr 20th 2018
Last Activity
, Viewing forum J-Link/Flasher related

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Nevets -

    Replied to the thread GDB doesn't correctly flash mx29lv160db nor flash.

    Post
    If by CFI init you mean the initialization done in Jlinkscript for the memory addresses, then I know it works because gdb can use it to look at memories and jflash can use it to flash the memories. Is there a gdbserver log somewhere to give some…
  • Nevets -

    Replied to the thread GDB doesn't correctly flash mx29lv160db nor flash.

    Post
    I do start gdb with a jlink script. Maybe I am doing something wrong. I start the server with JLinkGDBServerCLExe -device AT91M40800 -scriptfile /opt/SEGGER/JLink/Devices/ATMEL/AT91M40800.JLinkScript Remember this is on Ubuntu and gdb generally works,…
  • Nevets -

    Posted the thread GDB doesn't correctly flash mx29lv160db nor flash.

    Thread
    Hi, I had a confusing failure. I am using Linux based command line jlink server for a at91m4800 arm7tdmi soc. Here is what the server says when staring up: Source Code (26 lines) And then I use command line gdb: Source Code (2 lines) The debugger…