SEGGER - MichaelF SuperModerator

  • Member since Mar 22nd 2018
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • SEGGER - MichaelF -

    Replied to the thread Flasher ARM in stand-alone mode and red led's signification.

    Post
    Hello Phil, there is an internal log file. If you mount the Flasher as MSD device, you can open the Flasher.log. To do so, press the PRG button while you plug in the USB cable. In addition you can record the outputs on the RS232 (9600 baud, 8N1)…
  • SEGGER - MichaelF -

    Replied to the thread Read button state on FlasherARM.

    Post
    Hi, we will consider, if that is a useful enhancement for the Flasher device. Best regards, Michael Fuhs
  • SEGGER - MichaelF -

    Replied to the thread Read button state on FlasherARM.

    Post
    Hi, no there no currently no command to read the button state. May be you can use the "#RESULT" command to get the current state of the Flasher. In idle the answer is "#RESULT:READY", during programming it changes "#RESULT:INIT", "#RESULT:CONNECTING",…