jnewcomb Community Member

  • Member since Jul 13th 2017
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • jnewcomb -

    Replied to the thread [SOLVED] STM32G474VE - Am I missing steps to enable trace?.

    Post
    Using the pex file did the trick! I just didn't find that project in all my hunting, hopefully this will help others.. I've got some different G series micros - please can you point me to a example or a jlinkscript file for any G4 series? While the pex…
  • jnewcomb -

    Replied to the thread [SOLVED] STM32G474VE - Am I missing steps to enable trace?.

    Post
    Some progress: Comparing registers on a working STM32F4 with the STM32G4, I noticed some registers are not getting initialized. I have managed to get a TRACECLK by forcing GPIOE values in the View->Registers windows. // MODER 0x00002AA0 // OSPEEDR …
  • jnewcomb -

    Posted the thread [SOLVED] STM32G474VE - Am I missing steps to enable trace?.

    Thread
    I have managed to get trace working using IAR, but unable to get trace working when importing .out file into Ozone. I just get 'no data' message in trace window. No activity on the TRACECLK. I (quickly) played around with Embedded Studio and seemed to…