SEGGER - Nino Administrator

  • Member since Jan 2nd 2017
Last Activity
, Viewing forum index

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • SEGGER - Nino -

    Replied to the thread Simple project using libopencm3 in SES.

    Post
    Hello, Thank you for your inquiry. Great to hear that you found a solution to implement the library in your project. For completion for other users that stumble upon this thread, Embedded Studio comes with a CPU support package manager that uses CMSIS…
  • SEGGER - Nino -

    Replied to the thread Debugging Assembler project with J-Link Edu.

    Post
    Hello, Thank you for your inquiry. A question mark on a breakpoint usually indicates that for this code part no instructions have been compiled and it is not part of the currently debugged application. This can be due to compiler optimization, not using…
  • Hello Christian, Thank you for your inquiry. The makefile exported from Embedded Studio sets paths as they are used inside Embedded Studio. This will also work for most makefile compatible third party tools. If you use other third party tools that…
  • SEGGER - Nino -

    Replied to the thread Target Connection Has Been Lost - but why?.

    Post
    Hello, Thank you for your inquiry. Usually a connection drops when a target does an illegal memory access and crashes or when the target goes to sleepmode or executes a WFI. Is one of these points possible for your setup? Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Ozone: Display issue in Ozone.

    Post
    Hello, Thank you for your inquiry. Such an issue is not known to us. Could you provide a snapshot and the corresponding elf file for reproduction? You can take the snapshot in Ozone via Debug->Save Snapshot. Leave all options on when taking the…
  • SEGGER - Nino -

    Replied to the thread strlen bug?.

    Post
    Hello, Thank you for your inquiry. strlen will not work in the watch window as this is no static variable information. You can use sizeof(variable) though. I also tested strlen in source code and it was working as expected. Did you include…
  • SEGGER - Nino -

    Replied to the thread SES, CLANG compilation Database and SourceTrail.

    Post
    Hello Christian, Thank you for your inquiry. Could you elaborate what you are exactly trying to do? What do you mean by "generate the compilation database for the CLANG"? If you mean that you want to use clang instead of gcc in your projects you can set…
  • SEGGER - Nino -

    Replied to the thread Run static code analysis from batch command line.

    Post
    Hello, Thank you for your inquiry. emBuild is solely a build tool so the requested features are not available. But you can of course call third party tools that use the output of emBuild. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread How to use external flash script from SES.

    Post
    Hello, If you are simply looking for a way to start an external tool via a button you could look at Embedded Studios external tools interface. studio.segger.com/ide_external_tools_file_format.htm To edit the file go to File->Open Studio Folder->External…
  • SEGGER - Nino -

    Replied to the thread Ozone and A53 armv8.

    Post
    Hello, Thank you for your inquiry. The roadmap has changed and other features were prioritized. Currently we can't tell exactly when this will be available in Ozone. Probably some time next year. To stay up to date with our releases you can subscribe…
  • SEGGER - Nino -

    Replied to the thread Can not activate Segger Embedded Studio permanently.

    Post
    Hello, Oh OK then this is a misunderstanding. The license pop-up is just a reminder that the base version of Embedded Studio may be only used for non commercial or educational purposes. In this free version this pop-up can not be removed. This can only…
  • SEGGER - Nino -

    Replied to the thread Can not activate Segger Embedded Studio permanently.

    Post
    Hello Daniel, Thank you for your inquiry. You can find troubleshooting steps for the Nordic license here: wiki.segger.com/Get_a_License_…dic_Semiconductor_Devices It appears that you are trying to open the default Hello project after a fresh ES…
  • SEGGER - Nino -

    Replied to the thread How to use external flash script from SES.

    Post
    Hello, Thank you for your inquiry. In project options under User Build Steps you can find multiple hook points where you can execute external tools etc. that use command line options. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Pylink Square library Python 3.x.

    Post
    Hello, Thank you for your inquiry. Pylink is not supported or maintained by SEGGER so unfortunately we can't provide information on this matter. So we recommend contacting Pylink support in this regard. We will leave this open for a bit should someone…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] NXP i.MX RT1011 support.

    Post
    Hello, Thank you for your inquiry. The iMXRT1011 will be supported with the next J-Link software update. You can subscribe to our notification list to stay up to date: segger.com/notification/subscribe.php?prodid=7 Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Problem while programming STM32F103RG.

    Post
    Hello, Thank you for your inquiry. The memory map in that J-Flash program is simply completely wring, this is why it does not work correctly. Attached you can find how it should look like. It seems that you are using a J-Link software that is quite old.…
  • SEGGER - Nino -

    Replied to the thread JTrace Cortex-M requirements.

    Post
    Hello, Correct as the J-Trace PRO has not application reference but only gets information from that target which instruction has been executed but not in what context. When you get your hands on a J-Trace PRO the following article will explain how you…
  • SEGGER - Nino -

    Replied to the thread JTrace Cortex-M requirements.

    Post
    Hello Ewout, Thank you for your inquiry. If you need to know what the application context is and want to use the streaming trace e.g. timeline feature we recommend having an elf file with all debug information and if possible without any optimization.
  • SEGGER - Nino -

    Replied to the thread Ozone VS Embedded Studio debugger.

    Post
    Hello, The long term goal is to merge both editors into one codebase so they have both the same features. But as both products were created independently and with different use cases in mind it could take some time to merge this. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Does Ozone support CMSIS-DAP?.

    Post
    Hello, Thank you for your inquiry. CMSIS-DAP is currently only supported in Embedded Studio. In future it is planned to roll out a licensing model to use CMSIS-DAP with other J-Link software e.g. Ozone as well. But currently there is no fixed time frame…