SEGGER - Nino Administrator

  • Member since Jan 2nd 2017
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • SEGGER - Nino -

    Replied to the thread [SOLVED] Dark Mode for Mac Solution.

    Post
    Hello, Thank you for sharing your config. To preserve the thread we will close this thread and mark it as solved. Best regards, Nino
  • Hello, We can confirm that the issues persists. We are investigating further. Keep you posted. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread 3.22e is unfortunately unstable is would appear.

    Post
    Hello, Such an issue is not know to us. Could you provide the image/picture from your opening thread? The link you provided does not work. That is what Fabian meant with "image". I just gave 10.15.7 a try and Ozone was working as expected. Could you…
  • SEGGER - Nino -

    Replied to the thread STM32L4 MCU: RTT block not found even with right address specified.

    Post
    Hello Erwan, Thank you for your inquiry. Such an issue is not known to us. Usually the approach you chose to set the RTT control block location manually should do the trick. Could you provide a J-Link log file of the failing session?
  • SEGGER - Nino -

    Replied to the thread SystemView could not be started.

    Post
    Hello, Please understand that we can't provide support for third party implementations. All needed information that you need to instrument your RTOS can be found in the SystemView manual. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Sum of CPU loads does not match with Idle %.

    Post
    Hello, Thank you for your inquiry. Could you give the latest SystemView version a try? There has been a fix for high load application recordings. Does the display improve? Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Freertos: Call stack for selected task?.

    Post
    Hello Viktor, yes that would be the .js one. You can find them in the Ozone installation folder. We will mark this thread as solved now. Happy debugging! Best regards, Nino
  • Hi Andreas, Thank you for your inquiry. Yes CTI and multi core stuff is usually not well documented anywhere and the only reference that provides reliable information is the generic manual by Arm. Unfortunately at the current point in time J-Link does…
  • SEGGER - Nino -

    Replied to the thread Use of JTrace to perform code coverage on ADuCM355 Eval board.

    Post
    Hello, Thank you for your inquiry. To be able to do code coverage you will need at least some sort of trace interface to output trace data. As you correctly stated the ADuCM355 series does not have any trace pins whatsoever (not even SWO is connected on…
  • SEGGER - Nino -

    Replied to the thread Systemview cjtag.

    Post
    Hello, Thank you for your inquiry. cJTAG is currently not available for SystemView. We will add it to our feature wishlist but can't name a fixed timeschedule when it will be available. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread No STM32G03x package?.

    Post
    Hello Markus, Quote from mmabln: “I wonder why there is no STM32G03x package available? ” Because it was not requested yet by users/customers. As every ES CPU support packages needs to be created and tested manually by our team we try to focus on…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Is Ozone free to use (non-commercially) with an J-Link EDU?.

    Post
    Hello, Thank you for your inquiry. Yes you can use Ozone with J-Link EDU for private or educational purposes. The Ozone license will be updated soon so it becomes more clear. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread SysView V2.52d Export data to further analysis in others programs.

    Post
    Hello, Other formats than svdat are not supported for export. Quote from Apool: “i could switch to 3.30, but i remember that i wasn't able to integrate it in my implementations (i'm using SMT32 and programming with Atollic) ” SystemView stayed…
  • SEGGER - Nino -

    Replied to the thread Using Ozone trace features with J-Link flashed on ST-Link.

    Post
    Hello, Thank you for your inquiry. A reflashed ST-Link has only capabilities for tracing via trace buffer. You can find an example project for the H7 buffer trace here: wiki.segger.com/STM32H7#Tracing_on_ST_STM32H743 Pin tracing will never work as the…
  • SEGGER - Nino -

    Replied to the thread Adding both .elf file and .svd file with Command Line arguments.

    Post
    Hello, -programfile will only take one file in either an elf format or the supported bin/hex formats. Svd files will not work as intended as they are not program files. We recommend to use the Ozone GUI and its project wizard to set up the project up…
  • SEGGER - Nino -

    Replied to the thread Embedded Studio RP2040 Support.

    Post
    Hello, FYI we just released the new CPU Support Pacakge for RP2040 and the BSP for the Pico board. You can find them in the ES Package Manager. The CPU Support package can be used for generic RAM samples. The BSP is for the Pico Board which links…
  • SEGGER - Nino -

    Replied to the thread ATSAME51N19 SWO not working properly.

    Post
    Hi Martijn, Quote from Marty-VB: “If I understand correctly the ATSAME51 isn't fully supported yet? ” It is fully supported from J-link perspective. However for SWO this particular target device can have a multitude of clocksources, sometimes…
  • SEGGER - Nino -

    Replied to the thread Difficulty Programming LPC2478 MCU with JLink.exe.

    Post
    Hello, Thank you for your inquiry. Generally if it works in IAR it will work with J-Link Commander. Just make sure to use the same interface, speed settings etc. that you set up in IAR. According to your second post downloading works now, but the…
  • SEGGER - Nino -

    Replied to the thread J-Link VCOM max baudrate..

    Post
    Hello, Thank you for your inquiry. The answer is, it depends. Technically the J-Link Plus should also be able to handle that baud rate, but there are limiting factors that can further decrease the maximum value:
  • SEGGER - Nino -

    Replied to the thread Support CC2652P in J-Link.

    Post
    Hello, Thank you for your inquiry. The CC2652P is currently not officially supported. But according to the datasheet it is similar to the CC2652R1F which we do support. Could you try selecting target device name CC2652R1F? Does debugging and flashing…