SEGGER - Nino Administrator

  • Member since Jan 2nd 2017
Last Activity
, Viewing profile Abbas

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • SEGGER - Nino -

    Replied to the thread Specific J-Link selection on per-user basis.

    Post
    Hello, I feel that there is a misunderstanding here. Ozone already has that feature (ignore all the command line stuff and scripts). You can already save in your Ozone .jdebug file which J-Link to use based on the serial number. It is simply that for…
  • SEGGER - Nino -

    Replied to the thread Specific J-Link selection on per-user basis.

    Post
    Hello, Quote from awneil: “but it doesn't do that. ” Ok that is odd. Works flawlessly for me for years. Could you provide a short clip on how you try to do this? Quote from awneil: “It's a workaround. I still think it would be nicer to have it…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Have Ozone disable Watchdog?.

    Post
    Hello, Thank you for your inquiry. Yes that would be one correct approach. You can of course also use a JLinkScript and SetupTarget(). Ozone generally offers all needed target manipulation actions like read, write, reset etc. See the Ozone manual for…
  • SEGGER - Nino -

    Replied to the thread Specific J-Link selection on per-user basis.

    Post
    Hello, Thank you for your inquiry. The prompt should only appear if more that 1 J-Link are detected to be connected to the host PC. Is this a common occurrence with you and your colleagues? Quote from awneil: “but the serial number is not added to…
  • SEGGER - Nino -

    Replied to the thread BeagleBone using JTAG with Jlink debugger.

    Post
    Hello, Thank you for your inquiry. The error message indicates that the elf file you are loading does not conform the elf file standard: en.wikipedia.org/wiki/Executab…nkable_Format#File_header As you can see they call a section in the header "magic…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Embedded Studio on 4K displays.

    Post
    Hello Bogdan, Thank you for your inquiry. We have the following option for that: Options -> Environment -> User Interface -> Show Large Icons in Toolbar Does that work for you? Best regards, Nino
  • Hello, Thank you for your feedback. I will pass this on to our team. But we can't promise if such change will be implemented or not. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Data Trace with Jtrace PRO and Ozone on ARM R5 core!.

    Post
    Hello, yes that is normal. The instruction trace window will only show the last ~64 MB of raw trace data received. Depending on your target device that is typically somewhere between 50-100 million instructions. Default options in Ozone is to display…
  • SEGGER - Nino -

    Replied to the thread Data Trace with Jtrace PRO and Ozone on ARM R5 core!.

    Post
    There is no data trace support available in our tools or software. You can of course extract the ETB data manually and write your own analyzer but this is outside of our support scope. For this the trace data can be dumped into a trace file:
  • SEGGER - Nino -

    Replied to the thread Data Trace with Jtrace PRO and Ozone on ARM R5 core!.

    Post
    Hello Prashanth, data trace via the trace pins is not supported by either J-Trace Pro nor Ozone. Currently there are no plans to add support for this for the existing trace probes. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Data Trace with Jtrace PRO and Ozone on ARM R5 core!.

    Post
    Hello, Quote from prashanth.prakash: “So how can we enable data tracing on Ozone then? ” It is not supported. Data tracing is only supported by a hand full of Cortex-A and -R devices and would require a 16 bit trace interface to avoid overflows. As…
  • SEGGER - Nino -

    Replied to the thread [ARCHIVED] Follow-up on the previous topic "Is Pico SDK supported?".

    Post
    Hello, Thank you for sharing your setup. Great to hear that the Pico SDK is now working with your ES Setup as expected. To keep this information available for other users as well we will now close and archive this thread. Happy debugging! Best…
  • SEGGER - Nino -

    Replied to the thread Data Trace with Jtrace PRO and Ozone on ARM R5 core!.

    Post
    Hello Prashanth, Thank you for your inquiry. Please note that the data trace that you refer here to is independent from the 5 pin trace that you use for instruction tracing. Instead it uses the debug interface and HSS.
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Removing SystemView from target fro production build.

    Post
    Hi Sid, Thank you for your inquiry. The generic approach that would work for any SystemView instrumentation is to encapsulate all SystemView calls with e.g. #if DEBUG or similar. In the case of FreeRTOS it is sufficient to make the include of the…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Reading data in a memory location using SDK (LabVIEW).

    Post
    Hi, I see that you contacted our support in parallel. So you were indeed using the J-Link SDK. As the issue has been resolved this thread will be closed now. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Reading data in a memory location using SDK (LabVIEW).

    Post
    Hello, Thank you for your inquiry. Which SDK/DLL are you referring to exactly? Do you mean the J-Link SDK? Please understand that public mention of any DLL functions is a license violation. If you have issues with the J-Link SDK please get in contact…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Porting UCOS 3 with SystemView.

    Post
    Hello Peter, Great to hear that you are up and running again. We will consider this thread as solved now. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Is Pico SDK supported?.

    Post
    Hello, You can call CMAKE and other tools via command line in ES projects options under "User Build Step". However please understand that we can't provide support on how to as the Pico SDK is not our product. So we recommend to consult the Pico SDK…
  • SEGGER - Nino -

    Replied to the thread SEGGER_RTT_Conf.h build failure on clang.

    Post
    Hello, Thank you for your inquriy. This is simply an old version of the RTT files. We always recommend to the latest RTT files. Currently we are on Rev. 24316 You can find them in your J-Link software installation folder under Samples/RTT The latest…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Is Pico SDK supported?.

    Post
    Hello, Thank you for your inquiry. As the Pico SDK is written mostly in C it is compatible to Embedded Studio. So simply add the required sources as you would do with any other third party source or library. A general guide on how to add third party…