SEGGER - Nino Administrator

  • Member since Jan 2nd 2017
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • SEGGER - Nino -

    Replied to the thread RTT slow not usable anymore.

    Post
    Hello, Thank you for your feedback. To investigate this further we would need a reproduction scenario. Could you provide us with an example project for some Cortex-M eval board? Easiest for us would be for Embedded Studio, but if you use another IDE the…
  • Hello, Thank you for your inquiry. Such an issue is not known to us. Generally our software stays backwards compatible so if you use the exact same settings in both versions it should keep working. You seem to be working for a silicon vendor, in this…
  • SEGGER - Nino -

    Replied to the thread J-Link command enhancement - trivial but very helpful null:= step.

    Post
    Hello DG12, Thank you for your feedback. We will discuss internally if this could be implemented in future. However currently we see the issue that it could break backwards compatibility to customers using commands scripts which could result to…
  • SEGGER - Nino -

    Replied to the thread j-link list breakpoints.

    Post
    Hello, Did you try to open the mentioned web control link in your folder? Quote from Wiki: “A web version is also available via localhost:19080/ on all platforms. ” Which J-Link software version are you using? Could you try the latest one? Best…
  • SEGGER - Nino -

    Replied to the thread J-Link support for ZGM130S037HGN.

    Post
    Hello, Quote from cvicens: “The problem is that I don't have an .elf loader file. Where would I get the appropriate file for my device? ” You need to write your own. How is explained here: wiki.segger.com/Adding_Support…ng_SEGGER_Embedded_Studio There…
  • SEGGER - Nino -

    Replied to the thread J-FLASH not reading external memory LH75401.

    Post
    Hello, Thank you for your inquiry. The LH75401 is an ARM7 which have some specialties when it comes to connection speeds. Setting it to automatic speed will not work as the automatic speed will most likely be to fast. We recommend using a connections…
  • SEGGER - Nino -

    Replied to the thread J-Trace and IAR.

    Post
    Hello Gawie, Yes IAR will utilize the 64 MB on board buffer so depending of the target speed and created trace data this can be enough to reconstruct the last couple of seconds. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] SFR display not working for register arrays of nRF52840.

    Post
    Hello Dirk, Great to hear that you are up and running again. As the initial inquiry has been solved this thread will be closed now. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Sow to determine MAC address used for SES License.

    Post
    Hi Russ, Oh OK, I assumed you already gave our sales team the MAC addresses, sorry for the confusion. When choosing the "right" MAC address we recommend choosing a physical one which is build into your PC, like the Ethernet controller or build in…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Ozone.

    Post
    Hello, Thank you for your inquiry. We received your inquiry via e-mail in parallel. For future inquiries please try to use only one contacting channel, otherwise it can happen that information gets lost between channels which can lead to unnecessarily…
  • SEGGER - Nino -

    Replied to the thread J-Trace and IAR.

    Post
    Hello, Thank you for your inquiry. IAR unfortunately does not support any streaming trace features. For the best trace experience we recommend using Ozone the J-Link debugger. It can be used for free with a J-Trace PRO and works with IAR output formats.…
  • SEGGER - Nino -

    Replied to the thread Issue related to debugging GHS compiled elf on S32K.

    Post
    Hello, Thank you for your inquiry. Native J-Link support in GHS debugger has been removed by Greenhills a while ago. So at this current point in time we can't give any assistance with Greenhills setups as they are no longer supported. For any setup…
  • SEGGER - Nino -

    Replied to the thread JLink OB on Nordic nRF52 Dongle on Mac.

    Post
    Hello, Thank you for your inquiry. Quote from Mron: “I've seen this as an old issue that was fixed about 4 years ago with nRF51 Dongles. Any help is appreciated. ” If that is the case then it should work with nRF52 as all eval boards known to us…
  • SEGGER - Nino -

    Replied to the thread J-Link support for ZGM130S037HGN.

    Post
    Hello, Thank you for your inquiry. We can't find any information about the ZGM130S037HGN. Could you provide a reference link? What Coretype is it? Currently supported devices can be found here: segger.com/products/debug-prob…pported-cpus-and-devices/
  • SEGGER - Nino -

    Replied to the thread Ozone issue with ADS generated axf image.

    Post
    Hello, Thank you for your inquiry. This sounds like an incompatibility of the elf file with current standards. Could you provide us with the elf file so we could check if there is a generic issue with Ozone interpreter? Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Sow to determine MAC address used for SES License.

    Post
    Hello Russ, Thank you for your inquiry. If I see correctly you have purchased Mac locked ES licenses. In that case at some point you provided our sales team with MAC addresses of your PCs to lock the licenses to. Additionally you should have received a…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] SFR display not working for register arrays of nRF52840.

    Post
    Hi Dirk, Quote from dzabel: “(the "v3" seems strange to me, I have installed the SES v4.10a, but there is no "v4" folder). ” This is due to backwards compatibility as between v3 and v4 there were no changes for package handling so the name was kept…
  • SEGGER - Nino -

    Replied to the thread Embedded Studio debug terminal displays random junk periodically.

    Post
    Hello, Thank you for your inquiry. Such an issue is not known to us. Embedded Studio will only display what data it finds in the RTT buffer. So it is save to assume that for some reason "garbage" data is written into RTT Buffer. RTT is provided in…
  • SEGGER - Nino -

    Replied to the thread Debugger code upload clear flash ?.

    Post
    Hello, Thank you for your inquiry. Such an issue is not known to us. J-Link will usually only delete used sectors and leave everything else untouched. Did you verify that the application that has been downloaded at all? What target devices are you…
  • SEGGER - Nino -

    Replied to the thread STM32 Example Project and Timer Problem.

    Post
    Hello Joe, Thank you for your inquiry. When importing more complex projects from IAR or Keil to Embedded Studio there are certain steps that need to be considered regarding compatibility. An example guide for a proper import can be found here: