SEGGER - Nino Administrator

  • Member since Jan 2nd 2017
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • SEGGER - Nino -

    Replied to the thread [SOLVED] Post-Mortem Debug Using Recorded Trace Data.

    Post
    Hello Russ, To stay up to date with our releases we suggest subscribing to our update notification list: segger.com/notification/subscribe.php?prodid=178,7 This thread will be closed now. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Post-Mortem Debug Using Recorded Trace Data.

    Post
    Hello Russ, Quote from schmalr: “I am simply exploring what we will be able to do (and how) in the future when we have our custom ASIC (which is under development). ” Depending on how your devices implements the trace pins you will most likely need…
  • SEGGER - Nino -

    Replied to the thread TMS570LS0432/JLink EDU: IDCODE mismatch.

    Post
    Hello, We are using this board: ti.com/tool/TMDS570LS31HDK With a TMS57043 on it. Quote from tpmeier: “I just attempted connecting to my devboard again, and managed to get it working this time around. Maybe I connected something wrong the first time?…
  • SEGGER - Nino -

    Replied to the thread Synergy S5D9 support in J-Trace Pro?.

    Post
    Hello, Yes that board should work. But you would probably need to use a "flying wire" setup which will no yield high trace clock speeds due to interference. To reach maximum trace clock a proper Trace debug header connection is required. We will try to…
  • SEGGER - Nino -

    Replied to the thread TMS570LS0432/JLink EDU: IDCODE mismatch.

    Post
    Hi, Thank you for your inquiry. What is the S/N of your J-Link Edu? We tried to reproduce the issue with a J-Link V10 that we have here (same hardware as Edu) and everything was working fine on an TMS570LS043 Hercules Developement Kit. Are you using…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Post-Mortem Debug Using Recorded Trace Data.

    Post
    Hello Russ, Thank you for your inquiry. Not sure if we understand your setup correctly. So you are tracing via pins and are using Ozone. Correct? Which target device are you tracing? You now want to dump the instruction trace data into a local file and…
  • SEGGER - Nino -

    Replied to the thread Is it possible to use RTT with mips based controllers (pic32mx...).

    Post
    Hello Michael, Thank you for your inquiry. RTT is currently only available for Arm Cortex-M and some Renesas RX cores: segger.com/products/debug-prob…about-real-time-transfer/ The prerequisite is that the core type supports background memory access…
  • SEGGER - Nino -

    Replied to the thread STM32H7 ETF Trace with J-Link.

    Post
    Hello Thomas, Thank you for your inquiry. Quote from thomask77: “Is there already support for this mode in the J-Link / Ozone? ” Not yet for the STM32H7 series as ST choose a very non standard implementation here which means a bit of rework in our…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] RTT-viewer telnet server.

    Post
    Hello, To be able to use this function you need to set RTTTelnetAllowNonLocalClient before the J-Link DLL is loaded. This is currently only possible with the J-Link SDK where you can write your own Application. More information about the SDK can be…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] RTT-viewer telnet server.

    Post
    Hello, It is available with the latest J-Link software version V6.40. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Stack Usage Difficulty.

    Post
    Hello Russ, Thank you for providing reproduction steps. With them the issue was reproducible but only if SEGGER Linker was used. It did not matter for us if gcc or clang was used as compiler. We are currently working on a fix which should be available…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] STM32H7 ETM Trace.

    Post
    Hello, Great to hear that you are up and running again. This thread will be closed now. Best regards, Nino
  • Hello, Please understand that without being able to reproduce the issue we only can guess. To make things easier could you provide us with the following? Quote from SEGGER - Nino: “Generally to be able to find the source of such issues we suggest the…
  • SEGGER - Nino -

    Replied to the thread Question about 'Timeline window'.

    Post
    Hello, Thank you for your inquiry. 1: This will be improved with the next SystemView release version. 2: In the Event view window you can already set references and measure the time between them. For timeline this is not added yet but might come in…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] RTT-viewer telnet server.

    Post
    Hello, Yes, enabling external RTT clients is supported. You can use J-Link command string RTTTelnetAllowNonLocalClient for that. More information can be found in the latest J-Link user guide UM08001. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread JLinkSTR91x.exe Batch file command help.

    Post
    Hello, Thank you for your inquiry. To use a batch file with the J-LinkSTR91 Commander you can use CL options -CommanderScript or -CommandFile. How to use them is explained in the J-Link user guide UM08001 in section 3.2.3. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] STM32H7 ETM Trace.

    Post
    Hello, The manual is a bit moot at that point you cited. The clock tree in the manual is accurate though so you can orient on that. In register PLL1DIVR the DIVR1 divides down the trace clock. In the 400 MHz eval sample it shifts 5 << 24 to achieve a /6…
  • SEGGER - Nino -

    Replied to the thread SES Hangs on Target Power Fail - Unrecoverable.

    Post
    Hello, Thank you for your inquiry. We will try to reproduce the reported behaviour and fix it if possible. Sorry for any inconveniences caused. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Template configuration.

    Post
    Hello, Quote from Gossamer: “I would rather have my own project template then to use generic ones..as I have more control on how wizard creates the skeleton application for me. I would appreciate help in creating a template, well to fix these issues…
  • SEGGER - Nino -

    Replied to the thread Synergy S5D9 support in J-Trace Pro?.

    Post
    Hello, Generally tracing should be working with the S5D9 device series. The target device implements an ETM and TPIU which should be sufficient. However we could not find an evalboard that has a trace debug header available with trace pins connected to…