SEGGER - Nino Administrator

  • Member since Jan 2nd 2017
Last Activity
, Viewing forum index

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • SEGGER - Nino -

    Replied to the thread Instruction Trace window only displays "No Data".

    Post
    Hello, Technically SWO trace would be possible via ITM/TPIU (see linked Wiki article). However the datasheet does not mention any SWO pins. I recommend to contact Gigadevice Support as we have no additional information if SWO is available or not. If…
  • SEGGER - Nino -

    Replied to the thread wrong .c file in debugger when multiple projects in solution.

    Post
    Hello Phillip, I am aware that this is not a board specific issue. But we need a reproducer to investigate further. You seem to have a already working reproducer. Could you in any way share one that could run on an eval board? A stripped down version…
  • SEGGER - Nino -

    Replied to the thread Instruction Trace window only displays "No Data".

    Post
    Hello, Thank you for your inquiry. The behaviour is expected. The GD32F3 series does not have an ETM so the chip does not provide trace support. Quote from GigaDevice when we ran into a similar issue with the GD32F4 series: " Only the GD32F10x (HD, XD,…
  • Hello, Thank you for your inquiry. See here for more information on how to make Ozone projects portable: wiki.segger.com/Make_Ozone_projects_portable Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Ozone -- Top of stack - no unwinding symbols at <address>.

    Post
    Hello, Thank you for your inquiry. Such an issue is not known to us. Could you provide a example project for reproduction that would run on an eval board? Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Deactivate events.

    Post
    Hello, Thank you for your inquiry. See SEGGER_SYSVIEW_DisableEvents(). For IDs < 32 you can disable the event generation here e.g. ISR Enter/Exit. Everything else depends on how you instrumented the RTOS. Also increasing the target interface speed and…
  • SEGGER - Nino -

    Replied to the thread No "options" for any files in project tree.

    Post
    Hello James, Thank you for your inquiry. When importing STCubeIDE projects to Embedded Studio all folders that are imported are "real" folders and display the exact file tree as it would be on your file system. However in that mode all file options that…
  • SEGGER - Nino -

    Replied to the thread wrong .c file in debugger when multiple projects in solution.

    Post
    Hello Phillip, Thank you for your inquiry. Such an issue is not known to us. Generally ES will reference the main.c file on the path that is compiled into the elf file. Is the issue reproducible on an eval board? If yes which one? Could you then…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Some feedback for Embedded Studio.

    Post
    Hello, Thank you for providing the settings file. Both remaining issues were also reproducible now and are noted. For completeness. Issue 1 was only reproducible with Dark Mode on. The last issue was only reproducible when Text Editor Encoding was set…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Problem Importing Projects into SES.

    Post
    Hello James, Great to hear that you are up and running again. Happy Debugging! @Diogo The Importer has currently been only tested on Windows Platform. It is possible that for macOS or Linux additional steps are necessary. We will see if support can be…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Some feedback for Embedded Studio.

    Post
    Hello, Thank you for your feedback. Only some of the issues were reproducible for me. See my attached screenshot. Could you share your editor and font settings. Which ones did you change from default? Quote from Masmiseim: “Embedded Studio does…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] nRF5340 Application Exampke.

    Post
    Hello, Thank you for your inquiry. This is not really an Embedded Studio related question as it is target device specific how this is achieved. As J-Link and Embedded Studio support over 10000 different devices it is impossible to provide samples for…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Problem Importing Projects into SES.

    Post
    Hello James, Thank you for your inquiry. A general guide on how to use the ES Importer with CubeMX projects is available here: wiki.segger.com/Import_project…CubeMX_to_Embedded_Studio Unfortunately CubeMX project structures and configs are constantly…
  • SEGGER - Nino -

    Replied to the thread patch file FreeRTOS 10.4.6.

    Post
    Hello, OK it seems that FreeRTOS is incompatible again after a "minor" update... great... We will put a patch for FreeRTOS 10.4.6 on our wishlist, but can't promise a fixed time schedule as our resources are quite booked right now. You can of course…
  • SEGGER - Nino -

    Replied to the thread patch file FreeRTOS 10.4.6.

    Post
    Hello, Thank you for your inquiry. Currently we provide a patch file for V10.4.3. On which file does the patch fail? Did you follow the following guide when patching your project? wiki.segger.com/FreeRTOS_with_SystemView Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread About the debugging in SES.

    Post
    Hello, An Edu Compact is not planned as we have the Edu Mini already: segger.com/products/debug-prob…k/models/j-link-edu-mini/ Please note that the Edu variants of J-Link may not be used in any commercial context but only for private or educational…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Secure memcpy.

    Post
    Hello, Quote from Masmiseim: “memcpy_s is standardized with C11, same with strcpy_s. ” Yes and no. Only the function name and parameters are defined. Not the function implementation itself. To best of our knowledge this is not implemented in…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] View content of std::vector.

    Post
    Hello, Thank you for clarifying. This is currently not supported by Ozone. We will add it to our wish list but no promises when this will be implemented. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread About the debugging in SES.

    Post
    Hello, Quote from eggplant886: “Thank you Nino. The J-link is quite an amazing debug probe. I have one but it's not as tiny as a STLINK. I would try it later. ” We also have a J-Link Compact model now if size is an issue for you:
  • SEGGER - Nino -

    Replied to the thread Ozone project file interaction.

    Post
    Hello, Thank you for your inquiry. You only need to change the SP/PC when a bootloader is involved or if the wrong application entry point is detected by Ozone: wiki.segger.com/Debug_on_a_Target_with_Bootloader