SEGGER - Nino Administrator

  • Member since Jan 2nd 2017
Last Activity
, Viewing forum index

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Hello, Thank you for your inquiry. We received your inquiry via our support channel in parallel as well. To make sure no information is lost between channels this thread will be closed now. Please do not use multiple contact channels for the same…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Readout protection doesn't actually protect from readout?.

    Post
    Hi, it is generally recommended to power cycle a MCU when protection is enabled. This ensures on (most) chips, that the settings get active. Additionally this also ensures that the J-Link connection is reset as well ;) Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Folding behavior of the register view.

    Post
    Hi Marco, Great to hear that you are up and running again. Case closed. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Headless Install - automate license use acceptance.

    Post
    Hello, Thank you for your inquiry. As mentioned in the other thread, this is intentionally not public knowledge so I will drop you a PM. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread ozone and bare metal assembly.

    Post
    Hello, Thank you for your inquiry. Your GCC toolchain should give you some elf output file. If you load that up in Ozone the assembly sources should be referenced automatically. Just make sure that you set compiler options so debug info is generated.…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] STL container support.

    Post
    Hi Marco, yes it is still on our ToDo but not with high priority. So we can't name any fixed release date. But it is not forgotten ;) Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Folding behavior of the register view.

    Post
    Hello Marco, Thank you for your inquiry. Such an issue is not known to us. Which version of Ozone are you using? Do you see the same behaviour in the latest version? Does it happen with binary files only or also with elf files? Could you provide exact…
  • SEGGER - Nino -

    Replied to the thread Ozone debugging Portenta H7 - add mbed OS view window.

    Post
    Hello, Thank you for your inquiry. Correct embOS is our own RTOS so the plugin would not work with other RTOS's. Generally it is possible to view RTOS info of any RTOS in Ozone. But you need to supply a plugin so Ozone knows where to look for…
  • SEGGER - Nino -

    Replied to the thread Continuous data sampling.

    Post
    Hello, Which J-Link Ultra+ exactly? There are multiple hardware revisions. Could you share your serial number please? What target device are you debugging exactly? Continuous recording is possible. However there will be naturally gaps as the gaps are…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Missing macro definition I in complex.h in SES 6.32b.

    Post
    Hello, Thank you for your inquiry. Indeed the definition for I was removed. I will check with the team. Most likely it will be reintroduced with a future update. EDIT: I talked to the team. It will be reintroduced with the next Embedded Studio update.…
  • SEGGER - Nino -

    Replied to the thread emSSL on a system with LWIP Ethernet stack, and FreeRTOS OS.

    Post
    Hello, Thank you for your inquiry. emSSL works with any standard sockets, so the proposed setup would work. For more information feel free to contact our support team as described in my signature. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread PowerPC.

    Post
    Hello, Thank you for your inquiry. Currently there are no plans to add PowerPC support in Ozone. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] still no windows Dark theme?.

    Post
    Hello, correct dark theme is not available yet. It is still on our wish list but simply not with a high priority. Quote from AndyR: “i alwasy run with the windows Dark mode as well so you aren't even honouring the same thing as you do with Linux /…
  • SEGGER - Nino -

    Replied to the thread Continuous data sampling.

    Post
    Hello, Thank you for your inquiry. Maximum data sampling frequency depends on the debug probe you are using. Which one are you using? What is its serial number? What is the expressions you are sampling? Could you provide a screenshot of your…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] No data sampling?.

    Post
    Hi, Thank you for your inquiry. That is correct. For advanced performance analysis features Ozone needs to be used. In Embedded Studio the focus is more on the toolchain and project management. The debugger only supports some basic performance analysis…
  • Hello, OK thank you for clarifying. Regarding RTOS, maybe our RTOS embOS would be of interest for you. It runs on any MCU and is a perfect fit to Embedded Studio: segger.com/products/rtos/embos/ It also comes with hundreds of BSP example projects for…
  • Hello, Thank you for your inquiry. Which linker are you using in your project? SEGGER Linker or gnu linker? Generally you should be able to create a section for each code part and place the application accordingly. Now when you compile with Embedded…
  • Hello, Are you sure that the same code worked on another Cortex-M0+? Because the Syntax you are using is not supported for Cortex-M0+ which is Arm architecture Arm v6M. So this could have never have worked with a Arm V6M target. This code will only…
  • Hello, Unfortunately the issue is not reproducible for us. Could you attach an example project that shows the describe behaviour? Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Ozone with IMXRT1062.

    Post
    Hello, Great to hear that you are up and running again. Actually the process is documented, but in the J-Link Wiki as device specifics do not have to do anything with Ozone. wiki.segger.com/i.MXRT1060 The Ozone articles will only describe how to get a…