SEGGER - Nino Administrator

  • Member since Jan 2nd 2017
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • SEGGER - Nino -

    Replied to the thread [SOLVED] Some feedback for Embedded Studio.

    Post
    Hello, Thank you for providing the settings file. Both remaining issues were also reproducible now and are noted. For completeness. Issue 1 was only reproducible with Dark Mode on. The last issue was only reproducible when Text Editor Encoding was set…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Problem Importing Projects into SES.

    Post
    Hello James, Great to hear that you are up and running again. Happy Debugging! @Diogo The Importer has currently been only tested on Windows Platform. It is possible that for macOS or Linux additional steps are necessary. We will see if support can be…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Some feedback for Embedded Studio.

    Post
    Hello, Thank you for your feedback. Only some of the issues were reproducible for me. See my attached screenshot. Could you share your editor and font settings. Which ones did you change from default? Quote from Masmiseim: “Embedded Studio does…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] nRF5340 Application Exampke.

    Post
    Hello, Thank you for your inquiry. This is not really an Embedded Studio related question as it is target device specific how this is achieved. As J-Link and Embedded Studio support over 10000 different devices it is impossible to provide samples for…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Problem Importing Projects into SES.

    Post
    Hello James, Thank you for your inquiry. A general guide on how to use the ES Importer with CubeMX projects is available here: wiki.segger.com/Import_project…CubeMX_to_Embedded_Studio Unfortunately CubeMX project structures and configs are constantly…
  • SEGGER - Nino -

    Replied to the thread patch file FreeRTOS 10.4.6.

    Post
    Hello, OK it seems that FreeRTOS is incompatible again after a "minor" update... great... We will put a patch for FreeRTOS 10.4.6 on our wishlist, but can't promise a fixed time schedule as our resources are quite booked right now. You can of course…
  • SEGGER - Nino -

    Replied to the thread patch file FreeRTOS 10.4.6.

    Post
    Hello, Thank you for your inquiry. Currently we provide a patch file for V10.4.3. On which file does the patch fail? Did you follow the following guide when patching your project? wiki.segger.com/FreeRTOS_with_SystemView Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread About the debugging in SES.

    Post
    Hello, An Edu Compact is not planned as we have the Edu Mini already: segger.com/products/debug-prob…k/models/j-link-edu-mini/ Please note that the Edu variants of J-Link may not be used in any commercial context but only for private or educational…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Secure memcpy.

    Post
    Hello, Quote from Masmiseim: “memcpy_s is standardized with C11, same with strcpy_s. ” Yes and no. Only the function name and parameters are defined. Not the function implementation itself. To best of our knowledge this is not implemented in…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] View content of std::vector.

    Post
    Hello, Thank you for clarifying. This is currently not supported by Ozone. We will add it to our wish list but no promises when this will be implemented. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread About the debugging in SES.

    Post
    Hello, Quote from eggplant886: “Thank you Nino. The J-link is quite an amazing debug probe. I have one but it's not as tiny as a STLINK. I would try it later. ” We also have a J-Link Compact model now if size is an issue for you:
  • SEGGER - Nino -

    Replied to the thread Ozone project file interaction.

    Post
    Hello, Thank you for your inquiry. You only need to change the SP/PC when a bootloader is involved or if the wrong application entry point is detected by Ozone: wiki.segger.com/Debug_on_a_Target_with_Bootloader
  • SEGGER - Nino -

    Replied to the thread Ozone Debug Multiple Elf Files.

    Post
    Hello, Thank you for your inquiry. Currently Ozone can't load multiple elf files at the same time. But it is on our ToDo. You can load them consecutively as shown here: wiki.segger.com/Debug_Bootload…ion_in_same_Ozone_project But this will work only in…
  • SEGGER - Nino -

    Replied to the thread Support for Dialog DA14531.

    Post
    Hello, Thank you for your inquiry. Generally you can debug and develop software in Embedded Studio for all target devices that are supported by J-Link and are either Arm or RISC-V architecture: segger.com/downloads/supported-devices.php A guide on how…
  • SEGGER - Nino -

    Replied to the thread About "Command-line options" of "Segger Embedded Studio".

    Post
    Hello, Thank you for your inquiry. Please note that the Nordic SDK samples use an external toolchain where options might not translate 1:1 to Embedded Studio which is why Nordic is using their makefiles and config tools here for their external…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] About the UI of 'Project Explorer' panel.

    Post
    Hello, Thank you for your feedback. We will add this to our feature wishlist. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread About the debugging in SES.

    Post
    Hello, Thank you for your inquiry. For the best debug experience we recommend to use a J-Link with Embedded Studio. J-Link offers more features, is significantly faster, support for significantly more target devices and offers the feature you mention…
  • SEGGER - Nino -

    Replied to the thread Linux Studio packages.

    Post
    Hello Josef, Quote from krska: “If I understand it correctly, we are unable to refresh the package list in SEGGER Linux Studio because there is no package repository? ” Correct. Linux Studio currently has no use yet for the Package manager. Quote…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] BeagleBone using JTAG with Jlink debugger.

    Post
    Hello, Not sure what you are doing. Attached you can find an example project that is tested with BeagleBone Rev C Board and Ozone V3.26a Does this project work for you as well? If not you seem to have general connect issues. Connection troubleshooting…
  • SEGGER - Nino -

    Replied to the thread Linux Studio packages.

    Post
    Hello Josef, Thank you for your inquiry. Linux Studio was developed for native Linux host System application development that run on x86(_64). Cross compiling for embedded devices and remote debugging is not supported but on our wish list without a…