SEGGER - Nino Administrator

  • Member since Jan 2nd 2017
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • SEGGER - Nino -

    Replied to the thread JLinkScript return value of customized action function.

    Post
    Hi Joe, quick update. The latest J-Link software version should have not fixed return values for SetupTarget. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Hilscher netx90 APP core dubugging.

    Post
    Hello, Thank you for your inquiry. The App Core is currently not supported as it is not directly accessible via the debug port. Only Com core is supported. Best regards, Nino
  • Hello, This is still *not* at support forum! Please familiarize yourself with the forum rules before posting. Bumping threads will only slow down our answering process as threads with oldest activity will be answered first. So you are really not helping…
  • SEGGER - Nino -

    Replied to the thread JLinkScript return value of customized action function.

    Post
    Hello, Thank you for your inquiry. We were able to reproduce the behaviour and are working on a fix. The return value for SetupTarget is indeed not being evaluated at the moment. Sorry for any inconvenience caused. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread High frequency interrupts accuracy and overhead.

    Post
    Hi Alex, Quote from almost_linear: “Do I need to populate the SEGGER_SYSVIEW_X_GetTimestamp() function instead of using the DWT (0xE0001004) cycle counter on its own? ” This is optional. The cycle counter is usually accurate enough. If I understand…
  • SEGGER - Nino -

    Replied to the thread unreliable flash upload with J-Trace and SAM4S.

    Post
    Hello, Thank you for providing the Commander Session. It appears that your application has write protected parts of the Flash memory which leads to the error behaviour. We will investigate if we can improve our Flash algorithm so it can clear such…
  • SEGGER - Nino -

    Replied to the thread [J-Trace] [Texas Instruments AM335x] Compatibility.

    Post
    Hello, The generic components are usually detected automatically by J-Trace PRO via the ROMTable. But the ROMTable for this device seems incomplete so it needs to be added manually. Such an example script can be found attached. Keep in mind that the…
  • SEGGER - Nino -

    Replied to the thread J-Link unable to get ATSAML10E out of secure mode..

    Post
    Hello, Thank you for your inquiry. Such an issue is not known to us. If you did not change your setup and your application everything should still be working. For the unlock to work the reset pin must be connected to J-Link. Could you check if the reset…
  • Hello, Thank you for your inquiry. The Mediatek 6765 is currently not supported by J-Link: segger.com/downloads/supported-devices.php As such chips are usually not designed to be debugged by a external debug probe but rather to have a Linux running on…
  • SEGGER - Nino -

    Replied to the thread How to set JLink to never power the board.

    Post
    Hello, Thank you for your inquiry. Try "power off perm". This is usually the default J-Link is shipped with. Just make sure to not do a power on at some point again and the power supply pin will stay low. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread JLinkARM.dll not found.

    Post
    Hello, Great to hear that you are up and running again. When updating J-Link software make sure no software is open that is using the J-Link dll. Otherwise the installation will partially fail. To solve the eclipse issue try running the JLinkDLLUpdater…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] TM4C1290NCPDT instruction trace with Ozone.

    Post
    Hello, We received your inquiry via our support system in parallel as well. Please do not use multiple different channels for the same topic when communicating with us as in the worst case this will lead to lost information between the channels and a…
  • SEGGER - Nino -

    Replied to the thread unreliable flash upload with J-Trace and SAM4S.

    Post
    Hello, Thank you for your inquiry. Such an issue is not known to us. Could you verify functionality with J-Link Commander? Try the following sequence: connect reset halt erase loadfile "path to hex,bin etc." Does this work? If not could you provide a…
  • SEGGER - Nino -

    Replied to the thread JLinkARM.dll not found.

    Post
    Hello, Thank you for your inquiry. I just tested the latest J-Link software package for Windows. After installation all usual files could be found in the install folder including JLinkARM.dll and RTTViewer. So it appears that either the download of the…
  • SEGGER - Nino -

    Replied to the thread How I can create a script to automate JFlash Lite program process.

    Post
    Hello Jose, Automation features are reserver to our professional debug probes of J-Link Plus or higher. J-Link EDU does not come with that feature set as such functionality is usually not needed in a educational environment. Best regards, Nino
  • Hello, Thank you for your inquiry. The other thread was abandoned due to inactivity of the OP. So far issues regarding GDBServer and SVC were not reproducible or the solution was outside of our softwarere. Nonetheless if you can provide us with a…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] ST-Link Reflash Utility for ST-LINK V3E ?.

    Post
    Hello, Quote from kvn: “OK, that's good, but the MCO output of ST-LINK is in high impedance too and does not feed the STM32H743 MCU with HSE clock! I checked it. It's really true. How to debug app in this case? ” Please refer to ST Support in this…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Can J-Link write flash on CC3220SF ?.

    Post
    Hello, Thank you for your inquiry. As user grantch stated the target device is supported with the Flashs listed. So programming should work. If debugging works in Flash depends on the target specifics. This information can be found in the target…
  • SEGGER - Nino -

    Replied to the thread J-Link Flash S32K144EVB-Q100 Unexpected core ID.

    Post
    Hello, Thank you for your additional information. Unfortunately the behaviour was not reproducible on the boards we have in house so far. We will see if we can get our hands on other samples. Nontheless the message should in no way impact your debug…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] j-link edu mini (V6.52e) - CPU could not be halted.

    Post
    Hello Bogdan, Great to hear that you are up und running again. We will consider this thread as solved now. Best regards, Nino