SEGGER - Nino Administrator

  • Member since Jan 2nd 2017
Last Activity
, Viewing forum index

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • SEGGER - Nino -

    Replied to the thread ETM on LPC55S69 EVK board.

    Post
    Hello, Thank you for your inquiry. The LPC55S69 unfortunately does not implement any ETB, so only ETM tracing via pins can be used. Quote from rabbitlennon: “I suppose there at least should be an ETM module available, because the ETM module is…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] loadbin to QSPI Flash on NXP K81 fails.

    Post
    Hello Denis, Great to hear that you are up and running again. As you correctly found out there is a big difference between selecting the generic k81 device name and the one allow setting the security bits. I assume that by using the latter some of the…
  • SEGGER - Nino -

    Replied to the thread Ozone ELF Loading Time.

    Post
    Hello, Thank you for your inquiry. Long load times in Ozone usually result from complex nested symbol information in the elf file which can sometimes appear "suddenly" even if the code change was small, the compiler output hower has changed…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Atollic/Eclipse J-Link cannot open listener port.

    Post
    Hello, Thank you for your inquiry. We received your inquiry via our support system as well. To make sure no data gets lost this thread will be closed now. Information for others who end up here: The issue seems to have been related to the host PC. It…
  • Hello, Thank you for providing the elf file. There seems to be a misconception on how the Elf.GetBaseAddr(); command works. We have addressed this in the next revision of the manual so it is more clear. Esentially GetBaseAddr will simply return the…
  • Hello, Thank you for your inquiry. To make sure we understand you correctly here, you are essentially looking for a way to inherit include paths that are set in e.g. a library project also to the executable project in the same solution. Is that correct…
  • SEGGER - Nino -

    Replied to the thread Create a new solution containing other SES projects.

    Post
    Hello, Thank you for your inquiry. To make sure we understand you correctly here, is everything working now? Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Window/desktop layout.

    Post
    Hello, Thank you for your inquiry. Everytime you close Embedded Studio for the last open project an .emSession file will be created which saves all current window positions etc. If you load the corresponding .emProject file next time in SES the settings…
  • SEGGER - Nino -

    Replied to the thread Nordic nrf52840.svd; registers not shown.

    Post
    Hello Owain, There have been no changes to SES yet in this regard. If you use the Registers.xml from the CPU support package in SES as explained in the linked thread everything should be working as expected. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread jtag issues debugging.

    Post
    Hello, Thank you for your inquiry. Such an issue is not known to us. What exactly does the error message say? Which version of Embedded Studio are you using? From the log we can not see any issues. Could you provide an example project for reproduction…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Slow programming on i.MX RT1051.

    Post
    Hello, You are welcome. We will consider this thread as solved now. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Slow programming on i.MX RT1051.

    Post
    Hello, Thank you for providing the init script. The chunking of writes you see in GDB Server is done by the GDB client you are using. GDB Server will simply execute whatever the GDB Client sends him. Please understand that we have no influence over this…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Slow programming on i.MX RT1051.

    Post
    Hello Mateusz, Thank you for your inquiry. Such an issue is not known to us. Could you try using our latest J-Link software to make sure we are not looking for something that has already been improved? segger.com/downloads/jlink/ Could you also try to…
  • Hello, Quote from tronic: “thank you very much for replying. I'm just wondering how variables can be out of scope inside a task of FreeRTOS which is always running and never gets quit. It would be fatal if the memory location is used for something…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] loadbin to QSPI Flash on NXP K81 fails.

    Post
    Hello, We tried to reproduce the reported behaviour but everything was working fine using V6.48b and a TWR-POS-K81 board. See programming result attached. The example hex file that has been used for testing is attached as well. Could you give the…
  • SEGGER - Nino -

    Replied to the thread SystemView for RTX/mbedOS.

    Post
    Hello Markus, Thank you for your inquiry. Currently there are no plans to add RTX to our shipping files. But if you could share your implementation we can take a look and see if it could be added. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread export project to makefile without segger linker.

    Post
    Hello, Thank you for your inquiry. Currently there is no automated tool that would allow this. So you would have to do it manually. Alternatively we recommend using our tool emBuild for CL building. Simply install Embedded Studio on your Jenkins server…
  • SEGGER - Nino -

    Replied to the thread Static code analysis guide?.

    Post
    Hello, Thank you for your inquiry. You can run the static code analyzer by right clicking a source file and selecting "Run Static Code Analyzer". It is currently not documented unfortunately. This will be fixed with the next manual revision. Best…
  • SEGGER - Nino -

    Replied to the thread Breakpoint opens wrong source file.

    Post
    Hello, Quote from Damon Kelly: “Surely the IDE can distinguish between the 2 original file names? ” Usually yes, which is why I wrote that the issue is not known to us. Could you answer my remaining questions? Quote from SEGGER - Nino: “Could…
  • SEGGER - Nino -

    Replied to the thread Cortex-M33 without TrustZone.

    Post
    Hello, Thank you for your inquiry. Sorry for the delay in response but this forum is not our official support channel so response times may vary. For more information see my signature. Regarding the trust zone issue. Which Ozone version are you using?…