SEGGER - Nino Administrator

  • Member since Jan 2nd 2017
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • SEGGER - Nino -

    Replied to the thread Post-Mortem Debug Using Recorded Trace Data.

    Post
    Hello Russ, Thank you for your inquiry. Not sure if we understand your setup correctly. So you are tracing via pins and are using Ozone. Correct? Which target device are you tracing? You now want to dump the instruction trace data into a local file and…
  • SEGGER - Nino -

    Replied to the thread Is it possible to use RTT with mips based controllers (pic32mx...).

    Post
    Hello Michael, Thank you for your inquiry. RTT is currently only available for Arm Cortex-M and some Renesas RX cores: segger.com/products/debug-prob…about-real-time-transfer/ The prerequisite is that the core type supports background memory access…
  • SEGGER - Nino -

    Replied to the thread STM32H7 ETF Trace with J-Link.

    Post
    Hello Thomas, Thank you for your inquiry. Quote from thomask77: “Is there already support for this mode in the J-Link / Ozone? ” Not yet for the STM32H7 series as ST choose a very non standard implementation here which means a bit of rework in our…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] RTT-viewer telnet server.

    Post
    Hello, To be able to use this function you need to set RTTTelnetAllowNonLocalClient before the J-Link DLL is loaded. This is currently only possible with the J-Link SDK where you can write your own Application. More information about the SDK can be…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] RTT-viewer telnet server.

    Post
    Hello, It is available with the latest J-Link software version V6.40. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Stack Usage Difficulty.

    Post
    Hello Russ, Thank you for providing reproduction steps. With them the issue was reproducible but only if SEGGER Linker was used. It did not matter for us if gcc or clang was used as compiler. We are currently working on a fix which should be available…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] STM32H7 ETM Trace.

    Post
    Hello, Great to hear that you are up and running again. This thread will be closed now. Best regards, Nino
  • Hello, Please understand that without being able to reproduce the issue we only can guess. To make things easier could you provide us with the following? Quote from SEGGER - Nino: “Generally to be able to find the source of such issues we suggest the…
  • SEGGER - Nino -

    Replied to the thread Question about 'Timeline window'.

    Post
    Hello, Thank you for your inquiry. 1: This will be improved with the next SystemView release version. 2: In the Event view window you can already set references and measure the time between them. For timeline this is not added yet but might come in…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] RTT-viewer telnet server.

    Post
    Hello, Yes, enabling external RTT clients is supported. You can use J-Link command string RTTTelnetAllowNonLocalClient for that. More information can be found in the latest J-Link user guide UM08001. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread JLinkSTR91x.exe Batch file command help.

    Post
    Hello, Thank you for your inquiry. To use a batch file with the J-LinkSTR91 Commander you can use CL options -CommanderScript or -CommandFile. How to use them is explained in the J-Link user guide UM08001 in section 3.2.3. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] STM32H7 ETM Trace.

    Post
    Hello, The manual is a bit moot at that point you cited. The clock tree in the manual is accurate though so you can orient on that. In register PLL1DIVR the DIVR1 divides down the trace clock. In the 400 MHz eval sample it shifts 5 << 24 to achieve a /6…
  • SEGGER - Nino -

    Replied to the thread SES Hangs on Target Power Fail - Unrecoverable.

    Post
    Hello, Thank you for your inquiry. We will try to reproduce the reported behaviour and fix it if possible. Sorry for any inconveniences caused. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Template configuration.

    Post
    Hello, Quote from Gossamer: “I would rather have my own project template then to use generic ones..as I have more control on how wizard creates the skeleton application for me. I would appreciate help in creating a template, well to fix these issues…
  • SEGGER - Nino -

    Replied to the thread Synergy S5D9 support in J-Trace Pro?.

    Post
    Hello, Generally tracing should be working with the S5D9 device series. The target device implements an ETM and TPIU which should be sufficient. However we could not find an evalboard that has a trace debug header available with trace pins connected to…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] J-Trace Pro not showing up in Ubuntu.

    Post
    Hello, We received your inquiry via our ticket system as well. To keep all information in one place this thread will be closed now. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Bug report: Printf AND RTT prototype.

    Post
    Hello, Thank you for the update. This thread will be closed now. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] STM32H7 ETM Trace.

    Post
    Hello, Quote from thomask77: “Can you point me to the exact line? As I understand, the PLL initialization is done in Setup/system_stm32h7xx.c, but I don't know which register to change. ” Our custom PLL init starts in the system:stm32h7xx.c in line…
  • SEGGER - Nino -

    Replied to the thread Ozone - How to properly setup Power Graph.

    Post
    Hello, The default sampling limit is 1M samples. You can increase it under Tools->Preferences->Maximum Sample Count We will improve documentation in that regard. For rule of thumb, 10M samples will need around 100 MB memory. Best regards, Nino
  • Hello, We received your inquiry via ticket system as well. To make sure no information gets lost between different communication channels this thread will be closed now. Best regards, Nino