SEGGER - Nino Administrator

  • Member since Jan 2nd 2017
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • SEGGER - Nino -

    Replied to the thread Data sampling for array data.

    Post
    Hi, Thank you for clarifying. This is currently not possible. But we will add it to our wishlist for future features for Ozone. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] PC-lint - error 305: unable to open module.

    Post
    Hi, Ah I see, good to hear that you are up and running again. We will consider this thread as solved now. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Hot key and keyboard layout.

    Post
    Hi, Thank you for providing additional information. We will see what we can do to improve the experience with such keyboard layouts as well. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Correct typing of Thumb functions for "SEGGER_THUMB_Startup.s ".

    Post
    Hello, No worries, and yes, the nRF package does not come with the correct startup yet. But an update is planned shortly. All other packages that are not transformed yet will also be updated by us. But if you generate a generic project for your target…
  • SEGGER - Nino -

    Replied to the thread JLink TI 14-pin to ARM 20-pin adapter.

    Post
    Hello, A list of our distributors can be found here: segger.com/purchase/distributors/ Unfortunately we do not get the stocking information from them so you would have to contact the distributors directly. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Linux: a lot of issues in dark mode.

    Post
    Hello, Thank you for your inquiry. Dark mode is not supported officially and as you found out correctly, Ozone simply uses the current OS theme. A proper darkmode is on our ToDo but no fixed timeschedule yet. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Linux: V3.20e, text in status bar flickering.

    Post
    Hello, Thank you for your inquiry. Such an issue is not known to us. Could you provide a video or gif showing the behaviour? What Linux version are you using exactly? Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Linux: wrong version shown?.

    Post
    Hi, Thank you for your inquiry. I just gave it a quick try on a Ubuntu18 VM and the versions were showing up correctly for both the deb and tgz. Most likely this is somehow related to your specific Linux config. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Data sampling for array data.

    Post
    Hello Max, Thank you for your inquiry. You can display the data in a table in the Data Sampling window in the Samples tab. If you right click the content you can also export it. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Time line window main() stack up. Any solutions?.

    Post
    Hello, Thank you for your inquiry. We received your inquiry in parallel via our support system so this thread will be closed now. For other users that find this thread: Such timeline usually appears when either compiler output with maximum optimization…
  • Hello Luca, Please note that this is a IAR project setup specific question which is not a SEGGER product. For questions on how to use the IAR IDE we recommend contacting IAR support. This thread will be closed now. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Could not open J-Link shared library. Exiting now.

    Post
    Hello, Thank you for your inquiry. The original error message indicates that the JLink library could not be found due to the failed installation. Make sure to install the J-Link software with sudo in the default folder. If everything went correctly…
  • SEGGER - Nino -

    Replied to the thread JLink TI 14-pin to ARM 20-pin adapter.

    Post
    Hi, There are no other components mounted than the visible ones. I can confirm that the signal mapping on the website is accurate and that the adapters are successfully in use for many years now. You can of course try a flying wire setup but such…
  • SEGGER - Nino -

    Replied to the thread Suggestion to make Linux executables lowercase.

    Post
    Hello, Thank you for your inquiry. Currently there are no plans to change this as this as many customers rely on the tools to stay with this naming scheme for e.g. automated setups as they have for many many years since introduction. Nonetheless we…
  • SEGGER - Nino -

    Replied to the thread Provide C++ freestanding headers.

    Post
    Hello, Thank you for your inquiry. C++ library support is currently handled in Embedded Studio by an older STL Port which can be downloaded via the Package Manager. It is based in C++08 with some custom C++11 extensions and can be enabled in project…
  • SEGGER - Nino -

    Replied to the thread Error reading from memory.

    Post
    Hello Jeff, Thank you for your inquiry. It appears that the imported project is not yet set up correctly. How to use the import tool is described here for IAR: wiki.segger.com/Port_Projects_…kbench_to_Embedded_Studio But the same/similar steps apply…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] PC-lint - error 305: unable to open module.

    Post
    Hi, Not sure what went wrong here, but the default Tools.xml has worked for years now and is still working if you set the global macro as explained in the ES documentation. For reference here is the xml file source, should it have changed in your config…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Problem with new projects: "Relocation R_ARM_THM_CALL".

    Post
    Hello, Thank you for your inquiry. We are currently working with Nordic (as they maintain this package) on making the nRF Package ES V5 compatible, so a fixed ES nRF CPU support package should be available shortly. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Segger adds carriage return.

    Post
    Hello, Thank you for your inquiry. Do you see the same behaviour with the latest V5.10a version? Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Hot key and keyboard layout.

    Post
    Hello, Thank you for your inquiry. Such an issue is not known to us. Could you specify which keyboard layout you use exactly for testing? Just to make sure we use the same for testing. Best regards, NIno