SEGGER - Nino Administrator

  • Member since Jan 2nd 2017
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • SEGGER - Nino -

    Replied to the thread Feature Request RTT: SEGGER_RTT_GetAvailWriteSpace.

    Post
    Hello Matthias, Thank you for your feedback. We discussed this internally and will add a API call that returns number of free space in the buffer. This should be available with the next J-Link release. But keep in mind that the buffer will be free in…
  • Hello, Thank you for your inquiry. Broadcom devices usually require special init steps when connecting which is why the generic Cortex-A9 as target device does not work. Is the chip you are using listed on our supported devices site?
  • SEGGER - Nino -

    Replied to the thread Problems using JLink EDU with GD32VF103CBT6 based controller.

    Post
    Hello, Thank you for your inquiry. We are not aware of any issues with J-Link and the Longan Nano Board. The J-Link EDU has the same features set as the corresponding J-Link Base probe and both support RISCV-V cores. Did you follow the following…
  • SEGGER - Nino -

    Replied to the thread Can watchdog be paused when MMD is used for debugging?.

    Post
    Hello Min-Ching, What target device are you debugging exactly? Is it on custom hardware or eval board? If custom, do you see the same behaviour on an eval board? OnPoll is called periodically all the time when J-Link does not have to execute other…
  • SEGGER - Nino -

    Replied to the thread linker problem.

    Post
    Hello, Thank you for your inquiry. If it is a C or C++ library you can use it in Embedded Studio. To use it simply set it in project option additional input files. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Failed to measure CPU clock frequency.

    Post
    Hello, Please note that this is no support forum so replies from our engineers may be delayed. For more information see my signature. Regarding your J-Link, it appears that this one is defective. I have created a ticket with our sales department and…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] processor frequency.

    Post
    Hello, Thank you for your inquiry. The maximum processor frequency is target specific and can be found in the silicon vendors reference manual or data sheet usually. As this question is not SEGGER product specific this thread will be closed now. For…
  • SEGGER - Nino -

    Replied to the thread RISCV base timing information.

    Post
    Hello, Thank you for your inquiry. Could you elaborate what cycle count you are referring to? Currently Embedded Studio does not implement a cycle counter display for RISC-V. If you use a simulator project instead running on actual hardware we display a…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] JLink EDU and Renesas HEW and E2 Studio.

    Post
    Hello, Quote from cymatics: “However, i was never able to get a successful upload of my code to the processor and get it running. ” This is why we suggest trying it with the Commander first. If you can download and debug in the Commander, J-Link…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] JLink EDU and Renesas HEW and E2 Studio.

    Post
    Hello, Thank you for your inquiry. Quote from cymatics: “I'm really disappointed at the lack of input (and perhaps, concern) from Segger (and Renesas) on this issue. ” Sorry to hear that but you opened the thread out of our office hours with a…
  • SEGGER - Nino -

    Replied to the thread RTOS plugin when no GDBServer used ( = IDE / tool uses jlink dll ).

    Post
    Hi, If I understand you correctly you are looking to port the RTOS awarness to other IDEs/debuggers? Is that correct? In that case the interfacing with the J-Link library is generic and only a read and write function is called. Everything else is…
  • SEGGER - Nino -

    Replied to the thread Relocate symbols in OZONE.

    Post
    Hello, Thank you for your inquiry, To move symbols to another location you can use command Project.RelocateSymbols. How to use it is explained in the Ozone user manual. Section "" Scripting Interface shows a sample on how to do it with a bootloader…
  • SEGGER - Nino -

    Replied to the thread RTOS plugin when no GDBServer used ( = IDE / tool uses jlink dll ).

    Post
    Hello, Thank you for your inquiry. The IDE and Ozone use different awareness plug ins than GDBServer. ES: wiki.segger.com/Enable_RTOS_Awareness_in_Embedded_Studio Ozone: Shipped with Ozone. Can be found in Ozone installation folder under Plugins. How…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Forum as non support? How about your sale description.

    Post
    Hello, Thank you for your feedback. Quote from v01d: “I find this is nonsense as far as 'not a support forum' goes. Please look on what is printed on the page inside of my purchased Segger J-Link EDU unit, see photo attached. ” Good catch. The EDU…
  • SEGGER - Nino -

    Replied to the thread Impossible to have multiple instances of SES on MacOSx Catalina.

    Post
    Hi, quick update. Try launching ES with CL option "open -n". This should allow you to open multiple instances of the same app under macOS. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Impossible to have multiple instances of SES on MacOSx Catalina.

    Post
    Hello Lorenzo, Thank you for your inquiry. The reported behaviour was reproducible and we are working on a fix. The issue comes from new access rights management imposed by Catalina which has not been communicated properly by Apple. Anyhow we are sure…
  • SEGGER - Nino -

    Replied to the thread ST-Link On Board feedback.

    Post
    Hello, Thank you for your feedback. We will discuss this internally and improve the tool where needed. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Plugging in J-Link mini backwards.

    Post
    Hello, Thank you for your inquiry. On the J-Link EDU Mini you will find a 1 printed next to the header. This is the side Pin1 is on. On your cable you will find a red marking. This is also the side where Pin 1 is located. If you match them you should…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] JLinkScript return value of customized action function.

    Post
    Hi Joe, quick update. The latest J-Link software version should have fixed return values for SetupTarget. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Hilscher netx90 APP core dubugging.

    Post
    Hello, Thank you for your inquiry. The App Core is currently not supported as it is not directly accessible via the debug port. Only Com core is supported. Best regards, Nino