SEGGER - Nino Administrator

  • Member since Jan 2nd 2017
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • SEGGER - Nino -

    Replied to the thread [DUPLICATE] A newbie step.

    Post
    Hello, See your other post for more details on how to get started. emStudio, arm and ETA We will close this thread now to avoid duplicate threads. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread emStudio, arm and ETA.

    Post
    Hi, On the CPU Support Package website there is a video that shows how a simple hello world project can be created within seconds: segger.com/products/developmen…o/technology/cpu-support/ Did you give this a try? All you need to do is to install the…
  • SEGGER - Nino -

    Replied to the thread Correct use of Debug.Evaluate when writing RTOS-aware plug-in.

    Post
    Hello, Thank you for your inquiry. Such an issue is not known to us. Which Ozone version are you using currently? Is it the latest 3.20h? If not could you give that a try? Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Ozone window views geometry lost when dragging window to another screen.

    Post
    Hello, Yes, the fix should be in the current Ozone release. We also got it confirmed to be fixed by another customer. Eventually it was a different issue that only looked similar. We will check again with the information from the linked thread. Best…
  • SEGGER - Nino -

    Replied to the thread How to fix "Error while recording" and/or overflows.

    Post
    Hello Jez, Thank you for your inquiry. Quote from JezC3128: “I've tried SWD @4, 8, 10 & 12 kHz but that doesn't seem to make any difference. ” Can you confirm you mean kHz and not MHz? If yes, that might already be the source of the issue. Try >20…
  • SEGGER - Nino -

    Replied to the thread How does J-Link EDU Mini connect to cortex-A7 device?.

    Post
    Hello, Thank you for your inquiry. Yes Cortex-A is supported by J-Link Edu Mini. From your description it sounds like you are connecting the debug connector incorrectly to your board. To connect 9-pin to 20-pin you can use the following adapter:
  • SEGGER - Nino -

    Replied to the thread Could not connect to J-Link.

    Post
    Hello, Quote from mattb1969: “The second link you shared references J-Link Commander, I have no such application, which one is on Mac? If I use JLinkExe, it works, I can connect and gather info about processor and indicates 'Cortex-M0 identified.‘…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] 'program 1 over 0' error on single step.

    Post
    Hello David, The linker thread talks about a completely different setup so these two issues are not comparable. For the iMX the fix is implemented. However this will not work for all >10000 devices that we support as it is a target specific…
  • SEGGER - Nino -

    Replied to the thread Monitoring heap usage.

    Post
    Hello, While that might be true >99% of our customers expect fast and/or small code. That is what the SEGGER RTL is optimized for. So our malloc and other memory management functions are as small as possible. mallinfo is usually used for Linux systems…
  • SEGGER - Nino -

    Replied to the thread Monitoring heap usage.

    Post
    Hello, Thank you for your inquiry. mallinfo() is no C std lib function which is why it is not available with our current run time libs. We will however consider it and put it on our wish list. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Problem with function "isfinite()".

    Post
    Hello Stephan, Thank you for your inquiry. isfinite is currently not yet implemented in the math.h of the SEGGER RTL but it should be available with the next Embedded Studio update. Currently we are moving the ES RTL to the SEGGER RTL step by step which…
  • SEGGER - Nino -

    Replied to the thread Locating a memory corruption in my application.

    Post
    Hello, Thank you for your inquiry. When you reach the fault handler Ozone the application will usually halt and trace data will be displayed in the instruction trace window and timeline window. If I understand you correctly this is also the case for…
  • SEGGER - Nino -

    Replied to the thread Error Message in Dialog can be Edited.

    Post
    Hi, Thank you for your inquiry. The issue is reproducible and yes it is not intended. It will be fixed. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] SWO usage.

    Post
    Hello, in short yes. But if you are going for pin tracing anyhow you will get many advanced debug features that make any feature the ITM would bring obsolete. If you planned on using SWO for printf we recommend using RTT instead. Then also the SWO pin…
  • SEGGER - Nino -

    Replied to the thread Code Completion is not working.

    Post
    Hi Stavros, Could you provide a little example project which shows the reported behaviour so we can try to reproduce the issue? Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] enabling tracing with JLink (not JTrace).

    Post
    Hello, Thank you for your inquiry. The J-Link does not have any pin tracing capabilities. For this a J-Trace PRO is required: segger.com/products/debug-probes/j-trace/ If your target device features a trace buffer, a J-Link can be used for tracing. An…
  • Hello, Thank you for your inquiry and sharing of your findings. Good to hear that you are up and running again. Generally there are no known issues with J-Link and SWO and as you found out yourself the issue was IDE/Cube MX related. Please note that…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Unable to connect to CC2652P via cJTAG.

    Post
    Hello Tze, A firmware update is not possible as the V1 version is out of maintenance and support. So yes, a trade in is the only option currently. We recommend to discuss the remaining details with Sales. This thread will be closed now. Best…
  • SEGGER - Nino -

    Replied to the thread SystemView 3.12 Read Recorded Data not working.

    Post
    Hello Ulrich, Thank you for your inquiry. Such an issue is not known to us. Do you see the same behaviour with SystemView V3.20? What target device are you debugging exactly? Could you provide a J-Link log of the SystemView session?
  • SEGGER - Nino -

    Replied to the thread SystemView debug mode vs release mode.

    Post
    Hello, Thank you for your inquiry. Such an issue is not known to us. What SystemView sources are you using? Which IAR Version are you using? What are the error messages you are getting exactly? Best regards, Nino