SEGGER - Nino Administrator

  • Member since Jan 2nd 2017
Last Activity
, Reading thread Which mating connector to put on Target for 19-pin Cortex-M Adaptor ribbon cable?

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • SEGGER - Nino -

    Replied to the thread [J-Trace] [Texas Instruments AM335x] Compatibility.

    Post
    Hello, Thank you for your inquiry. Generally that target device should be tracable with our J-Trace PRO Cortex probe. Could you name the S/N of your probe for verification? For that particular device we do not have a trace example project yet so you…
  • SEGGER - Nino -

    Replied to the thread linker creates loadable section even when I say load ="no".

    Post
    Hello, Thank you for your inquiry. It is correct that the linker will create a section there, but it will not be downloaded. It is just information for the linker not to place code there. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Cylic Update of local/global variables.

    Post
    Hello, Great to hear that you are up and running again. This thread will now be marked as solved. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Profiling CortexM0 with Ozone.

    Post
    Hello, Thank you for your inquiry. Cortex-M0 devices unfortunately lack any kind of hardware tracing capability. That is why nothing happens in Ozone. Optional trace features are implemented in Cortex-M0+ and higher. Nonetheless we provide SEGGER RTT…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Stack pointer is setup to incorrect alignment.

    Post
    Hello Peter, Good to hear that you are up and running again. It appears that I-Jet simply ignores the error and works around it. We on the other hand will tell you if the IDE tells J-Link something "illegal" to do ;) This thread will be marked as solved…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Stack pointer is setup to incorrect alignment.

    Post
    Hello, Thank you for your inquiry. Please note that IAR Workbench is no SEGGER product so we can't help you out here. We suggest contacting IAR support instead. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Cylic Update of local/global variables.

    Post
    Hello, Thank you for your inquiry. I think your are looking for the watch window. Could you give it a try? Edit: It seems that your registered with a company e-mail and you are using a J-Link EDU. Please note that any kind of commercial use of our EDU…
  • SEGGER - Nino -

    Replied to the thread Ozone 2.70a: Issues running under Ubuntu 18.04 in virtual machine.

    Post
    Hello, Thank you for your inquiry. Such an issue is not known to us. Ozone should behave always the same no matter the platform. Could you provide an example project for reproduction? Then we could take a look. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] JLINK plus V10 bricked.

    Post
    Hello, Thank you for your inquiry. Please note that this is no support forum. Could you open a Support inquiry in our official channels in this regard? How is explained in my signature. To avoid duplicate information this thread will be closed…
  • Hello, Thank you for your inquiry. Could you open a support inquiry through our official channels for this? How you can find in my signature. This thread will be closed now to avoid double information. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Ozone can not load Amazon FreeRTOS source code..

    Post
    Hello Aaron, Thank you for your inquiry. How is the application set up? Any bootloader or softdevice that needs to be taken into account? What target device are you debugging? More information on how to set up "non-standard" application setups with…
  • SEGGER - Nino -

    Replied to the thread Error: Could not find core in Coresight setup.

    Post
    Hello, Thank you for your inquiry. What target device are you looking to connect to? Is is supported by J-Link? Make sure to use the exact device name when connecting to the target: segger.com/downloads/supported-devices.php Generic connect by…
  • Hello, Thank you for your inquiry. Such an issue is not known to us. Which J-Link software version are you using? Do you have any tool additionally open to RTTViewer or RTTLogger that might receive RTT data? Keep in mind that RTT data can be read only…
  • SEGGER - Nino -

    Replied to the thread How can I pull in SEGGER_RTT_printf(...) function.

    Post
    Hello, Thank you for your inquiry. If you are updating RTT files we recommend updating all. Then you can also use this with an older SystemView version. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Flashing multiple MCU with one segger prob.

    Post
    Hello Adrien, Thank you for your inquiry. If the target devices are on the same board and interconnected to each other you could set up a JTAG chain. That way you can address each MCU individually and program them one after another. How to setup JTAG…
  • SEGGER - Nino -

    Replied to the thread Ozone Bug: RTT messages sent to Terminal window OR telnet at random.

    Post
    Hello, Thank you for your inquiry. The reported behaviour is expected. The RTT data can only be read by one application at a time. After a read the data is no longer available. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Ozone FreeRTOS Awareness Issues.

    Post
    Hello, Thank you for your inquiry. Currently Ozone ships only with FreeRTOS scripts for Cortex-M3, M4, M7, ARM and Cortex-A9. R4 is not provided yet. However you can simply use either the CA9 or ARM script as base and create your own for…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] incorrect endianness format returned from JLinkGDBServer.

    Post
    Hello Guillaume, Great to hear that you are up and running again. Quote from Sauci: “Sorry for posting this on the forum, I was not aware of that. ” Its fine to post in the forum, I was just pointing out that we were made aware of that through…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] incorrect endianness format returned from JLinkGDBServer.

    Post
    Hello Guillaume, Thank you for your inquiry. We got similar requests via our support system. It should be fixed with the latest J-Link version V6.52a. Could you give it a try? Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Ozone v.2.70 and C++ Lambdas.

    Post
    Hello Eldar, Thank you for your inquiry. Such an issue is not known to us. Could you provide an example project for reproduction that would run on an eval board? Best regards, Nino