dmarples Beginner

  • Member since Nov 23rd 2016
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • dmarples -

    Replied to the thread [SOLVED] Ozone: Corrupted code profile window.

    Post
    Thanks...that fixed it. I figured the Beta would be newer than the release version and didn't look closely at the release :-/ Regards DAVE
  • dmarples -

    Replied to the thread J-Trace and 4 bit TRACE on IMXRT1021.

    Post
    I get 1 :( AFAIK there's nothing special I have to do in order to be able to _read_ from the TPIU.... Regards DAVE
  • dmarples -

    Replied to the thread J-Trace and 4 bit TRACE on IMXRT1021.

    Post
    Hi Nino, This is our own board and we've specifically brought out the trace pins to be able to use with the JTrace....which is a bit of a pain as they're shared with the Ethernet. I've PMed you my s/n and email address. If you could send me the source…
  • dmarples -

    Posted the thread [SOLVED] Ozone: Corrupted code profile window.

    Thread
    Hi there, My Code Profile window is corrupt for both 'Run Count' and 'Fetch Count', see pic attached. Is there any known fix for this? V2.61i on Ubuntu 18.04. Regards DAVE
  • dmarples -

    Posted the thread J-Trace and 4 bit TRACE on IMXRT1021.

    Thread
    Hi there, I'm trying to do parallel trace on an IMXRT1021 144 pin variant. I can only seem to get it to work for 1-bit wide tracing. When I try to set 4 bit (either via Ozone GUI or using a JLinkScript file with the line JLINK_TRACE_PortWidth = 4) I…