v01d Community Member

  • Member since Feb 29th 2016
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • v01d -

    Replied to the thread JLinkExe unwanted GUI.

    Post
    Quote from SEGGER - Fabian: “I will send you a link with a preliminary version for testing purposes via PM. ” I tried it, and the problem now was the Accept License terms dialog / message box. Firmware update window suppression worked.
  • v01d -

    Replied to the thread JLinkExe unwanted GUI.

    Post
    Quote from SEGGER - Fabian: “The only thing that changed is that we added GUI support for Linux, ... b) We will add a "-nogui" command in our next release. ” But this sounds excellent. Thank you So as to set a reminder to upgrade : which release…
  • Hey Erik Quote from SEGGER - Erik: “Basically there are two possibilities: ” This is great stuff, thank you. Yes I was thinking along the route of setting hardware address watchpoint at address X. One obvious non-nicety is too much knowledge at the…
  • v01d -

    Replied to the thread GDBServer : FreeRTOS thread count is unreasonably big ...

    Post
    Hello, Now I have sent you an archive containing the setup exactly as I use to create this problem / trace (there is nothing more to it beyond it, its complete). I described exactly how I start it in the README, and the logs are from it essentially ( I…
  • Hey Erik Quote from SEGGER - Erik: “....... If the core is hold in reset after triggering the reset, the ResetTarget() has to release the core and halt it. It does not make any sense to return from ResetTarget() if the core is not accessible through…
  • v01d -

    Replied to the thread JLinkExe unwanted GUI.

    Post
    Because this was new JLink software, on the first JLinkExe run immediately FW update dialog popped up, which thus started this thread. I immediately killed the app, and starting looking into how I can avoid these dialogs. My setup is Linux x86_64…
  • v01d -

    Replied to the thread GDBServer : FreeRTOS thread count is unreasonably big ...

    Post
    Quote from SEGGER - Fabian: “Hi, Could you please send us a J-Link log file? How to enable: wiki.segger.com/J-Link_DLL#Enable_J-Link_Log_File ” I have messaged you the logfiles through the forums's message box - please see & let me know if you got it.…
  • Quote from SEGGER - Fabian: “Not necessarily. Depends on the previous / current state and upcoming actions. Quote from v01d: “How does it check it exactly ” Depends on the device (core) you are using. Usually by reading the debug registers. ” Is…
  • I need to have a special ResetTarget() in my JLink script file. From the manual, it says, If this function is present, it will be called instead of the DLL internal reset. It also notes that, limitation is, DLL expects target CPU to be halted / in debug…
  • v01d -

    Posted the thread GDBServer : FreeRTOS thread count is unreasonably big ...

    Thread
    JLink package v670g. Starting GDBServer with freeRTOS pluing on , i get error trace : ERROR: FreeRTOS thread count is unreasonably big, not proceeding. Now, I cannot say my previous Jlink V652e had the issue, and FreeRTOS plugin was working fine,…
  • v01d -

    Replied to the thread JLinkExe unwanted GUI.

    Post
    The GUI constantly interferes with operation - starting with asking to update firmware. Passing exec SuppressControlPanel doesn't work; Requires to further pass exec SupressInfoUpdateFW. One would hope that, passing above two, and then doing exec…
  • v01d -

    Replied to the thread JLinkExe unwanted GUI.

    Post
    In the new version what previously was only command line / console is now seems by default invokes some JLink GUI server and causes unwanted Window popups. What is the proper way to disable this behavior, and keep to the old proper console only app as…
  • v01d -

    Posted the thread JLinkExe unwanted GUI.

    Thread
    The GUI constantly interferes with operation - starting with asking to update firmware. Passing exec SuppressControlPanel doesn't work; Requires to further pass exec SupressInfoUpdateFW. One would hope that, passing above two, and then doing exec…
  • v01d -

    Posted the thread [SOLVED] iMXx && other NXP support.

    Thread
    I saw on this thread forum.segger.com/index.php/Thread/7026-SOLVED-iMX8QX/ That iMX8QX JLink support - if I understood correctly - is implemented by NXP. Does this mean all Segger JLink support for NXP products, any chip/SoC, from now is handled by…