mastupristi Community Member
- Member since Feb 18th 2016
- Last Activity
This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.
-
mastupristi -
Replied to the thread Using SWO for Character Output in Production with J-Link Commander (No Debug).
PostHi Simon, Can JLinkSWOViewerCLExe and JLink Commander sessions coexist at the same time? best regards Max -
mastupristi -
Posted the thread Using SWO for Character Output in Production with J-Link Commander (No Debug).
ThreadI’m working in a production setup (not a development/debug session), where each board must be prepared before its main flash image is programmed. Our process is (simulated with EVK): 1. Connect to the MIMXRT1021-EVK via a Segger J-Link (SWD + SWO). 2. … -
mastupristi -
Replied to the thread Preserving a Sub-Range of QSPI-NOR Flash with J-Link Commander on NXP RT1xxx.
PostHello, I read this: kb.segger.com/ConfigTargetSettings()#Exclude_illegal_regions and I tried this script: forum.segger.com/index.php/Attachment/6233/ Then I try to attach to MIMXRT1021-EVK:/opt/SEGGER/JLink/JLinkExe -if SWD -speed auto -device… -
mastupristi -
Posted the thread Preserving a Sub-Range of QSPI-NOR Flash with J-Link Commander on NXP RT1xxx.
ThreadHello everyone, I’m using Segger J-Link v8.30 and an NXP RT1xxx MCU that boots from external QSPI-NOR flash mapped, for example, at 0x3000 0000. Although the NOR flash supports 4 KiB sector erases at the hardware level, J-Link Commander (and the GDB…