mookiedog Beginner

  • Member since Oct 13th 2015
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • mookiedog -

    Replied to the thread [SOLVED] RTT Output Delayed by Deep Sleep?.

    Post
    Thanks for the tip, I was able to figure it out. Here is what I came up with. First, since the Apollo3 is a Cortex M4, it can detect if a debugger is physically present like this: Source Code (3 lines) Second, in my routine that puts the system to…
  • mookiedog -

    Replied to the thread [SOLVED] RTT Output Delayed by Deep Sleep?.

    Post
    Where would I find the Nordic source code that demonstrates how to do that? Maybe I can replicate it.
  • mookiedog -

    Replied to the thread [SOLVED] RTT Output Delayed by Deep Sleep?.

    Post
    In case it wasn't obvious, here is sample output from two iterations. Source Code (28 lines)Lines 1 through 16 should get printed before the system goes to sleep for 4 seconds. Instead, only lines 1 through 11 get printed. Four seconds later, lines 12…
  • mookiedog -

    Posted the thread [SOLVED] RTT Output Delayed by Deep Sleep?.

    Thread
    I am working with an Ambiq Apollo3 Cortex M4 processor on a SparkFun Artemis module using Segger Embedded Studio. I have a FreeRTOS program that performs a task every 4 seconds. The task takes roughly 100 mSec to run. When FreeRTOS has nothing to do,…