Torsten Robitzki Beginner

  • Member since Jul 16th 2014
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Torsten Robitzki -

    Replied to the thread [CLOSED] unreliable flash upload with J-Trace and SAM4S.

    Post
    Hi Fabian, the J-Trace Pro is less than half a year old. If it helps to speed up this use, I will also open a ticket within your support system. The original message, that flashing with the J-Commander works flawless, was not quite correct. I can see…
  • Torsten Robitzki -

    Replied to the thread [CLOSED] unreliable flash upload with J-Trace and SAM4S.

    Post
    Is there anything, that I can do to mitigate the problem? Currently, it took me 20 retries to get the flash content to the controller. I don't know if this relates to a OS/X security update I've installed this morning, but for a >2000€ debug probe, the…
  • Torsten Robitzki -

    Replied to the thread [CLOSED] unreliable flash upload with J-Trace and SAM4S.

    Post
    That would be very helpful. Currently I have to start GDB 3-5 times, and search the tiny font on the GDB server to look for error message. May I propose to maybe print the error message in red, so that error could be spotted easier? Anyway: thanks for…
  • Torsten Robitzki -

    Replied to the thread [CLOSED] unreliable flash upload with J-Trace and SAM4S.

    Post
    While I was searching for similar error messages here in the forum, I found some cases, where the wrong device type caused similar problems (albeit more reproducible). I received the device type with the schematic of the hardware I'm working for. So I…
  • Torsten Robitzki -

    Replied to the thread [CLOSED] unreliable flash upload with J-Trace and SAM4S.

    Post
    As I'm still looking for a solution, I'm poking around a little bit and realized, that the J-Flash Lite software that comes with the J-Trace Pro, also has problems erasing the flash (I dunno, if that is somehow related to my problem): Quote from J-Flash…
  • Torsten Robitzki -

    Replied to the thread [CLOSED] unreliable flash upload with J-Trace and SAM4S.

    Post
    Hi Nino, thanks for looking into this. No, it doesn't work (beside the command for reseting seems to be "r" not "reset"). I'm getting reproducible an error while executing the "erase" command: Quote from Error while erasing: “J-Link>erase Erasing…
  • Torsten Robitzki -

    Replied to the thread [CLOSED] unreliable flash upload with J-Trace and SAM4S.

    Post
    Here is a second example: Quote from Segger GDB Server log: “Connected to 127.0.0.1 Reading all registers Read 4 bytes @ address 0x00403DDE (Data = 0x4770BC80) Read 2 bytes @ address 0x00403DDE (Data = 0xBC80) Received monitor command: speed…
  • Torsten Robitzki -

    Posted the thread [CLOSED] unreliable flash upload with J-Trace and SAM4S.

    Thread
    Hello, I'm using a J-Trace Pro to debug an ATSAM4SD32C. While I've tried to figure out, why my code is not doing, what it is supposed to do, I came to the conclusion, that the content of my elf file is not flashed correctly. This is not 100% reproducible…