SEGGER - Martin Administrator

  • Member since Jul 1st 2014
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • SEGGER - Martin -

    Replied to the thread Error 118 : OS_ERR_INTERNAL.

    Post
    Hi Audrey, Quote from AudreyD: “Don't you think there could be a problem with the region counter ? ” From your description and screenshots, I'm afraid I cannot see how this would be related to the region counter. Also, as til had mentioned…
  • SEGGER - Martin -

    Replied to the thread Error 118 : OS_ERR_INTERNAL.

    Post
    Hi Audrey, I've quickly tried to reproduce the observed issue, but to no avail. Does your application utilize ISP or USP when the SystemView init function is called? This is for the reason that, generally speaking, OS_ERR_ILLEGAL_IN_ISR will only be…
  • SEGGER - Martin -

    Replied to the thread Error 118 : OS_ERR_INTERNAL.

    Post
    Hi Audrey, Okay, so it's not embOSView but SystemView that fails to start. This, however, is somewhat expected: Auto-detection of the RTT control block will typically search through internal memory only, since J-Link cannot know the exact layout of your…
  • SEGGER - Martin -

    Replied to the thread Error 118 : OS_ERR_INTERNAL.

    Post
    Hi Audrey, Generally, no additional configuration is required even when part of the code is stored in external memory. Can you tell in more detail which problems do occur? Are you using J-Link as communications interface between target and host, or are…
  • SEGGER - Martin -

    Replied to the thread Empty mbOS project.

    Post
    Hi bar, Sorry for the delay in reply, unfrotunately I haven't been in office for a few days. If "Edit section placement" is not shown in the context menu, that typcially indicates no valid placement file was found or, alternatively, no placement file…
  • SEGGER - Martin -

    Replied to the thread Empty mbOS project.

    Post
    Hi bar, If all source files, librararies and include paths from the Nordic project are added to your project, there should be no unresolved references to Nordic API functions. In addition, you'd need to merge the flash_placement.xml and possibly the…
  • SEGGER - Martin -

    Replied to the thread Empty mbOS project.

    Post
    Hi bar, __start_nrf_section should be defined in the flash_placement.xml of the original Nordic project. Apparently, you're not using that in your combined project (i.e. did not merge the placement files from both projects). The same applies to other…
  • SEGGER - Martin -

    Replied to the thread Empty mbOS project.

    Post
    Hi bar, The embOS for Cortex-M and IAR project you're referring to probably is the generic CMSIS project. Such generic project, of course, is available with embOS for Cortex-M and ES, too. Please find it at…
  • SEGGER - Martin -

    Replied to the thread Error 118 : OS_ERR_INTERNAL.

    Post
    Hi Audrey, Please understand we can't give support on a customized embOS. However, we do offer an official embOS port for RX and IAR compiler as well. Please refer to our website for further information. If you're interested in obtaining that port,…
  • SEGGER - Martin -

    Replied to the thread Error 118 : OS_ERR_INTERNAL.

    Post
    Hi Audrey, Thanks for providing further information. Quote from AudreyD: “The device we use is R5F563NE in OS_LIBMODE_DP. The compiler we use is IAR C/C++ Compiler for RX v1.09, in IAR Embedded Workbench IDE - RX 3.10.6. ” Could you please confirm…
  • SEGGER - Martin -

    Replied to the thread Error 118 : OS_ERR_INTERNAL.

    Post
    Hello Audrey, Thanks for your inquiry. While we're not aware of any issues with embOS V4.02a for RX and CCRX, we of course would like to assist you in finding the root cause for the observed problem. Quote from AudreyD: “In which cases the region…
  • SEGGER - Martin -

    Replied to the thread How to import example in Nordic folder to mbOS environment.

    Post
    Hello bar, Quote from bar: “1.In my embOS I fond this file RTOSInit_nRF5x.c Is this is the right one? ” Yes, that's the right one. Quote from bar: “2. for the _WFI I found this function void OS_Idle(void) { // Idle loop: No task is ready to…
  • SEGGER - Martin -

    Replied to the thread How to import example in Nordic folder to mbOS environment.

    Post
    Hello bar, and thanks for your inquiry, Unfortunately, there's no automated way to merge the projects: You'd have to manually add the files to your project tree and subsequently add the include paths as well. Once done, you'd also need to perform 3…
  • SEGGER - Martin -

    Replied to the thread compiling with "armgcc" ( Nordic Example).

    Post
    Hi Ran, Quote from wrani: “Note that I see those symbols in ses_startup_nrd52840.s :"_vectors: .word __stack_end__" but not in ses_startup_nrd52840.s which is used when building from "armgcc" ” This is correct. With the armcc startup code,…
  • SEGGER - Martin -

    Replied to the thread [SOLVED] SetObjName after object release.

    Post
    Dear Vakaras, I'm glad to announce that the requested functionality will be included with upcoming versions of embOS. That is, V5.06 and later will include a OS_DEBUG_RemoveObjName() function, which may then be used in combination with e.g.…
  • SEGGER - Martin -

    Replied to the thread Dynamic size queue messages.

    Post
    Dear ptiguitardenver, Thanks for your inquiry. With embOS, users may choose between two distinct approaches: mailboxes and queues. While mailboxes work on fixed size messages only, a queue with embOS does in fact accept messages of variable size and…