dfridley Beginner

  • Member since Dec 5th 2012
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • dfridley -

    Replied to the thread Ozone - How to properly setup Power Graph.

    Post
    Hi Nino, Thanks for the reply. So, I was able to get this working, not sure exactly what the issue was. I did a couple of things that may or may not have "fixed" it. - I reset my J-Link Pro configuration (via J-Link Configuration) - I recalibrated…
  • dfridley -

    Posted the thread Ozone - How to properly setup Power Graph.

    Thread
    Hi, So, I have a need to analyze my power consumption on a Cortex-M3 and need some guidance on proper setup. I have a J-Link Pro V4.5 loaded with the latest firmware. These are the steps I have performed: Setup 1. Installed the latest version of…
  • dfridley -

    Replied to the thread Setting Symbol names with JScope and RTT.

    Post
    Thanks for the response Arne. Understood, we found a workaround that fits our needs... 1) save the raw data file. 2) create a new project file and save it then open the new project file in an editor and ... a) point to the raw data file b) add our…