SEGGER - Simon SuperModerator

Hello, .jdebug files are only used when debugging with Ozone. When working with J-Link in general, you need to create a JLinkScriptFile that includes the InitTarget() function. For more information, please refer to: J-Link Script Files This file must…

Hello, The J-Link Commander indeed uses only the JLINKARMDLL for communication with J-Link. To erase a range of addresses using the J-Link DLL, you can use the following approach: C Source Code (4 lines)Best regards, Simon

Hello, The limiting factor here is the speed of the target MCU. Since the target needs to calculate the CRC over the entire 2MB flash, this process naturally takes some time. Best regards, Simon

Hello, The AT45DB321E can be configured with two different page sizes: 512 bytes and 528 bytes. J-Flash SPI only supports page sizes that are powers of 2. It is likely that your flash is configured with a 528-byte page size, which would explain why…

Hello, You can find an example here: Template Example_ConfigTargetSettings_NXP_S32V234.JLinkScript Best regards, Simon

Hello, Could you please send me a private message with the SN of your Flasher? Best regards, Simon