AndyR Community Member

  • Member since Jun 16th 2022
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • AndyR -

    Replied to the thread unions with structs dont display properly.

    Post
    well just download it, find the instance of the structure and just change the U32 / memory fundamental value . that is all you need to show the issue as "Registers" is a global static variable with the union structs inside it
  • AndyR -

    Posted the thread New Software Versions.

    Thread
    why does ozone not report when newer versions are available and support the really not difficult to implement auto updating ?
  • AndyR -

    Replied to the thread unions with structs dont display properly.

    Post
    how do I know what boards you have ? this elf file is for a samd20J17 it won't run on any hardware you have but you can find the "Registers" global object to find a bunch of examples of those structures
  • AndyR -

    Replied to the thread unions with structs dont display properly.

    Post
    it's compiled under IAR this is a dump out of that union + another one using the iar ielfdumper tool 0x1'a743: | + union_type (82) | | sibling 0x1'a7d1 | | name UnControlReg | | byte_size 0x4 0x1'a756: |
  • AndyR -

    Replied to the thread unions with structs dont display properly.

    Post
    sorry I read it as is it fixed in latest version as you normally put , but yes the point is its not fixed
  • AndyR -

    Replied to the thread saving list of watches with the project.

    Post
    it answers the question , however it doesn't mean it is an entirely sensible philosophy its not uncommon to have different elf files for the same project that you would want to switch between without the rest of the environment changing as it is still…
  • AndyR -

    Replied to the thread saving list of watches with the project.

    Post
    why do the watches clear whe you open a new .elf / c.out etc? that I think is more likely the way i am loosing them
  • AndyR -

    Replied to the thread unions with structs dont display properly.

    Post
    no typedef union { struct { uint32_t SldEn : 1; uint32_t TecEn : 1; uint32_t IntegrationCap : 1; uint32_t : 1; uint32_t SaveCal : 1; uint32_t LoadCal : 1; uint32_t LoadCalToSystem: 1; …
  • AndyR -

    Replied to the thread saving list of watches with the project.

    Post
    3.26c
  • AndyR -

    Replied to the thread unions with structs dont display properly.

    Post
    3.26c
  • AndyR -

    Replied to the thread [SOLVED] ability to set refresh rate / display format on multiple watches.

    Post
    in the watched data window you cannot select multiple items with shift / control and apply the auto refresh time ( 1Hz, 10 Hz etc ) to the items you have selected
  • AndyR -

    Posted the thread [SOLVED] ability to set refresh rate / display format on multiple watches.

    Thread
    why can you select multiple things and apply the refresh rate ditto hex/dec view : yes i know you can apply to all but that is not overly helpful either
  • AndyR -

    Posted the thread unions with structs dont display properly.

    Thread
    union with struct overlaying with U32 & array of 2 U16 U32 & 2 U16s show ok struct doesn't but all show as the same address [ as you would expect ] typedef union { struct { uint32_t PowerEnable : 1; uint32_t Startup : 1; uint32_t Fault : 1; uint32_t…
  • AndyR -

    Posted the thread saving list of watches with the project.

    Thread
    am i missing something or is there no way for the list of watches to be remembered with the project file? it's a PITA if you have a lot of watches setup and then you close the machine, ozone crashes or you restart it , re-open the project and all the…
  • AndyR -

    Posted the thread [SOLVED] slower sample rates.

    Thread
    is there any way to get slower sample rates than 100Hz for the data sampling / graphing? quite a lot of things I do run for a long time but dont notionally change very quickly eg a battery discharging over hours so having samples at 100Hz ( minimum rate…