mrwaljit Community Member

  • Member since Sep 2nd 2021
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • mrwaljit -

    Posted the thread JLink with NXP IMXRT106x and modified flexRAM #2.

    Thread
    Hi, Re-opening this thread as the previous was got closed and the support ticket got closed as well. As a recap, I am trying to use a script to make ITCM memory available to JLINK so that flash erase/programming operations are possible, but so far this…
  • mrwaljit -

    Replied to the thread [SOLVED] JLink with NXP IMXRT106x and modified flexRAM.

    Post
    Hello Fabian, Thank you for your reply, it is appreciated. My use case is for erasing and programming the flash memory, using either the IDE (mcuxpresso) or an external script/command file would also be OK. The issue I have at the moment is this: I…
  • mrwaljit -

    Posted the thread [SOLVED] JLink with NXP IMXRT106x and modified flexRAM.

    Thread
    Hi I am using a Segger JLink for debugging/programming a NXP IMXRT106x micro with external QSPI flash. The IMXRT106x has 1MB of on-chip RAM, 512KB of which is "flexRAM" which can be re-configured to be either ITCM, DTCM or OCRAM. When I connect to…