vorosj Community Member

  • Member since Feb 10th 2021
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • vorosj -

    Replied to the thread Embedded Studio RP2040 Support.

    Post
    Studio v5.42 It has RP2040 package. The "RTT Hello world" compiled without error message, but debugging is not working at all. The above mentioned pico-ses is working. Debug/Go (F5): Flash upload is working, but the debugger fails. Workaround: - upload…
  • vorosj -

    Replied to the thread Embedded Studio RP2040 Support.

    Post
    Until you solve it, you can debug in Ozone. Pick RP2040 in the new project wizard, debugging is working very well with the .elf made by Studio. If upload is not reliable in Ozone, just upload the .hex with JFlash Lite, then "attach to running program" in…
  • vorosj -

    Replied to the thread Subsequent Connections to RP2040 Fail.

    Post
    I considered that one too. I am hobbyist, and my target uC-s are small (bluepill etc), so speed is not really important. Building things like this box is part of the hobby. :)
  • vorosj -

    Replied to the thread Subsequent Connections to RP2040 Fail.

    Post
    I am using Ozone with JLInk Edu mini and RP2040 B0. Ozone upload is working, but debugging fails after upload. Target reset doesn't help. But disconnect-reconnect JLink helps, after that "attach to running program" is working. It's probably the same…
  • vorosj -

    Replied to the thread [SOLVED] RP2040 Support.

    Post
    Debug session is working in Ozone with my Edu mini. :) Ozone v3.22b, RP2040_M0_0, SWD, 4MHz I compiled a simple blinky project in PlatformIO, using the WizIO-Pico platform. I added “build_flags = -g3” to .ini to get debug info in the .elf…
  • vorosj -

    Replied to the thread [SOLVED] RP2040 Support.

    Post
    So the mini is not good for the job. Thank you for testing n1kt0. How do I know the version of the J-Link Edu? Distributors like Farnell and RS-Online mark them as 8.08.90. Not sure what that means. The manual simply enumerates all the possible products.…