SEGGER - AlexD Administrator
- Member since Jan 12th 2021
- Last Activity
This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.
-
SEGGER - AlexD -
Replied to the thread Ozone Power Graph does not stop with code execution.
PostHi Andres H., we are not aware of such an issue with the power tracing. I just tried and failed in reproducing the described behavior with Ozone V3.32a on a SEGGER Cortex-M trace reference board V1.0. Power sampling stops as expected when reaching a… -
SEGGER - AlexD -
Replied to the thread Problem with C++ and.
PostHi Traxanos, we are not aware of such an issue. Which Ozone version are you using? Could you please check if the issue is reproducible on the latest Ozone release (V3.32a)? Could you please check if your build environment is set-up such that all debug… -
SEGGER - AlexD -
Replied to the thread [SOLVED] Ozone v3.32: Bit-fields strange behavior (not fully supported?).
PostHi Vladi552, could you please open a ticket in our support ticket system (see my signature for more details)? Best regards -- AlexD -
SEGGER - AlexD -
Replied to the thread [SOLVED] Timeline window of Ozone.
PostYou're very welcome. Happy debugging! -
SEGGER - AlexD -
Replied to the thread [SOLVED] Timeline window of Ozone.
PostHi GokhanAkkaya, Ozone does not come with a plug-in for Azure RTOS. However, you may create your own RTOS plug-in. Details on how that can be done can be found in the Ozone User's manual. Does that answer your question? Best regards -- AlexD -
SEGGER - AlexD -
Replied to the thread [SOLVED] Inability to show variable definition/declaration..
PostHi sckare, as stated beforehand: We do not support the 3rd party tool chain. However, so far we did not receive any inquiries by our customers that this quite commonly used feature does not work with Keil/Armcc. So we can assume that this tool chain in… -
SEGGER - AlexD -
Replied to the thread [SOLVED] How to automate periodically calling Export.CodeProfile from script.
PostHi fefu, you can add a call-back function to the break point that is executed each time the break point is taken. Inside that function you can issue the export command. Triggering a command on a timer base is not possible. Does than answer your… -
SEGGER - AlexD -
Replied to the thread [SOLVED] Inability to show variable definition/declaration..
PostHi sckare, please find attached a sample project for our Embedded Studio IDE. With this project you can see that Ozone is capable of navigating to the place where an enum is declared. Kindly understand that SEGGER cannot provide support for 3rd party… -
SEGGER - AlexD -
Replied to the thread [SOLVED] Inability to show variable definition/declaration..
PostHi Sckare, Finally I found the time to look into this topic. Ozone relies on the debug information provided by the build tool chain in the ELF file. This debug information tells Ozone where exactly a symbol is declared. Here's that information for a… -
SEGGER - AlexD -
Replied to the thread [SOLVED] J-Link EDU Mini and Ozone?.
PostHi daubsi, J-Link EDU mini is not supposed to be used for commercial purposes. Therefor the message you observe is displayed. Since you are using Ozone and J-Link EDU mini only for private purposes, this is OK. If your register window is empty your… -
SEGGER - AlexD -
Replied to the thread [SOLVED] How to halt the program immediately after download and reset? How JLinkScript can be reused both in J-Link GDB Server and Ozone?.
PostHi refu, good to see that you already found the answer to your question in the Ozone user's manual. That's what we made the documentation for. Since your single remaining open point is not related to Ozone, please consider posting that inquiry in the…