JLink suppress "device is secured" popup msg

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • JLink suppress "device is secured" popup msg

      How do I suppress "device is secured" popup msg by forcing Yes from jlink script? (unattended)
      Without clicking remember.

      Isn't there a forced parameter to "Erase all" command?


      I tried:
      unlock NRF52805_XXAA

      but it says:
      Syntax: unlock <DeviceName>
      ---Supported devices---
      LM3Sxxx [<Auto>]
      Kinetis
      EFM32Gxxx
      LPC5460x

      surely it must know how to do it, because it does it after I click yes.
    • Hello,

      You can prevent such popups with the command string SuppressGUI.

      For more details, please refer to the SuppressGUI Command String.

      Best regards,
      Simon
      Please read the forum rules before posting.

      Keep in mind, this is *not* a support forum.
      Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
      Should you be entitled to support you can contact us via our support system: segger.com/ticket/

      Or you can contact us via e-mail.
    • I added into .jlink file, but when I run the file with
      JLink.exe" -NoGui 1 -CommandFile test.jlink

      it says:

      J-Link>device NRF52805_XXAA
      J-Link>SuppressGUI
      Unknown command. '?' for help.

      also this fails too:
      JLink.exe SuppressGUI -NoGui 1 -CommandFile test.jlink

      and I still see
      Images
      • 2024_06_13_09_32_31_production.jlink_C_sandboxes_blefob_nrf52_tools_Notepad2_mod_Administrat.png

        16.72 kB, 671×188, viewed 553 times
    • Hello,

      Try exec SuppressGUI in your .jlink file.

      Best regards,
      Simon
      Please read the forum rules before posting.

      Keep in mind, this is *not* a support forum.
      Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
      Should you be entitled to support you can contact us via our support system: segger.com/ticket/

      Or you can contact us via e-mail.
    • Hello,

      I apologize if I have expressed myself unclearly.

      SuppressGUI is an J-link Command string not an command for the J-Link Commander.

      However, you can execute J-link Command string in the commander with the exec command, so in your case you need to write: exec SuppressGUI.
      Not only SuppressGUI.

      wiki.segger.com/J-Link_Command…ng_J-Link_Command_Strings

      Best regards,
      Simon
      Please read the forum rules before posting.

      Keep in mind, this is *not* a support forum.
      Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
      Should you be entitled to support you can contact us via our support system: segger.com/ticket/

      Or you can contact us via e-mail.