How to debug using J-Link edu mini along with NXP's S32DS

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • How to debug using J-Link edu mini along with NXP's S32DS

    Hi,
    I have a J-Link Edu mini and I'm using it for learning purposes. I am trying to debug the NXPS32k322 controller over Jtag from the NXPS32 Development Studio. I am new to the environment and unable to start.
    Any guidance as to how to debug using the probes and what are the necessary configurations required to do in the development studio will be helpful.
  • Hello,

    Unfortunately, we also have no experience using the NXP S32 Development Studio, so we recommend getting in touch with NXP about this.

    Here you can find a list of supported IDEs and how to use them with J-Link:
    wiki.segger.com/Supported_IDEs

    Best regards,
    Simon
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.