[SOLVED] Flashing 1.8V target boards with J-link mini edu

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] Flashing 1.8V target boards with J-link mini edu

    My current application uses a target board with a supply voltage of 1.8V. I would like to use the J-link edu mini as my programmer since it is the affordable J-link probe we can get, however, it seems that it only works with 3.3V target boards. Can you kindly advise on the best way to program the 1.8V target board with the J-link edu mini?

  • The EDU mini is not guaranteed to work with 1.8V targets, only with 3.3V ones.


    BR
    Alex
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.