[SOLVED] Is it possible to write/read the CP15 register in the jlinkscript

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] Is it possible to write/read the CP15 register in the jlinkscript

    Dear Segger Experts,

    I know that the CP15 register can be write/read by jlink command like:

    RCP15Ex RCE <Op1>, <CRn>, <CRm>, <Op2> Read CP15 register.
    WCP15Ex WCE <Op1>, <CRn>, <CRm>, <Op2>, <Data> Write CP15 register.

    So is it possible to write/read CP15 in the jlinkscript?

    Thanks in advance!

    BR,
    Gavin

  • Hi Gavin,

    Please note that bumping threads without added information is against forum rules.
    Please do not do it again, otherwise your account will be banned. This will be the only warning.

    Please also note that this is not a support forum but a community forum. There is no guarantee that you will receive an answer.
    For more information see my signature.

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.

  • What device do you use?
    What J-Link model?
    Are further J-Link purchases planned if this feature is going to be supported?
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.