Use multiple Jlink into same process

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Use multiple Jlink into same process

      Hi to all,
      I'm working on a C# project in which I've to read variables coming from two board which are connected through Jlink ( 2 different Jlink ).
      Reading the documentation I didn't find any mention regarding multiple Jlink for the same process, is it something possibile or not?
      The major problem seems related to the Jlink dll which are associated to a specific connection and cannot be shared between 2+ Jlink in the same process.
      In order to "avoid" this seems necessary create a different process in which I use the other Jlink but this is out of my scope ?( .
      Thanks for help!
    • Hi,
      I assume that you are using the J-Link SDK, correct?

      If so, could you please contact us via our support ticket system?
      segger.com/support/technical-support/

      Best regards,
      Fabian
      Please read the forum rules before posting.

      Keep in mind, this is *not* a support forum.
      Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
      Should you be entitled to support you can contact us via our support system: segger.com/ticket/

      Or you can contact us via e-mail.