[SOLVED] embedded studio or STM32CubeMX?

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Hello,

    Thank you for your inquiry.
    Both tools are not really comparable as they do different things. Embedded Studio is an IDE and CubeMX is simply a code generator.
    So if you are looking for an IDE that seamlessly integrates with embOS and is well rounded and supported by SEGGER, we recommend Embedded Studio.
    If you are looking for a universal STM32 code generator that generates projects for all kinds of toolchains, then CubeMX can be used.

    You can even import CubeMX projects into Embedded Studio for further development and debugging:
    wiki.segger.com/Import_project…CubeMX_to_Embedded_Studio

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.