[SOLVED] Upgrade Flasher 5 R1 to a R3 Possible?

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] Upgrade Flasher 5 R1 to a R3 Possible?

    Hello, Is it possible to Upgrade the Flasher 5 R1 to a R3?

    Was it just the flash size that changed? I can swap the flash chip if needed.

    Anyone have Internal Photos of the Flasher 5 R3

    I did a short teardown video


    Internal Photos Posted On My Personal Blog
    stevenrhine.com/?p=131707
    Check Out My Blog
    Programmers,
    Segger: Flasher 5 (Legacy) X 2, Flasher Pro, Flasher Portable Plus
    Xeltek: SP7500 SP-6100N X 2, SP-6000, SP-5000 X 2 SP-5004EGP, SP-5000E, SP-IS01
    System General T9200, T9800
    Others: Many

    The post was edited 1 time, last by Rhine_Labs: Added Info Video and Blog Post. ().

  • There is no help given for such things.
    A later HW version may not run with an older firmware or may require a completely different BTL + firmware.
    So, it is usually not possible to swap 1-2 components and expect the unit to suddenly be, report to be and work as a new HW version / revision
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.