[SOLVED] J-Link Probe with AMD (National Semiconductor) Geode LX 800

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] J-Link Probe with AMD (National Semiconductor) Geode LX 800

    Hello.

    Is there any solution for debug AMD (National Semiconductor) Geode LX 800 processor with J-Link Probe?
    As datasheet said: "It contains the JTAG interface and the scan chain control logic... The JTAG support includes a TAP Controller that is IEEE 1149.1 compliant."

    Thanks.

  • Hi,

    As far as I can see, this is an x86 based core.
    There is no native J-Link support for x86 targets.
    You may be lucky with J-Link + OpenOCD.

    BR
    Alex
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.