[ABANDONED] CCFG block contents for CC2340R5

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [ABANDONED] CCFG block contents for CC2340R5

    i am able to successfully load the blinky.elf" file provided on your wiki using JLINK

    would you be able to publish the "ccfg.c" source file that yielded the ".ccfg" section in the executable???

    executables produced using TI's CCS have *different* content in their ".ccfg" section, which seems to prevent JLINK from successfully loading these images....

  • Hi,

    Unfortunately, we do not have the C source of that application.
    The LED blink hex file has been created by TI and was sent to us to have a "working reference".
    What I can say is, that it also took 2 rounds to get a bootable / working hex file.
    We first got a file in which the CCFG area contents were not fully correct (there are some CRCs in there that were not correctly in the first file we got).
    This is most probably also the case for you.
    Not sure how TI CCS generates the CCFG contents in the resulting hex / ELF file but it looks like there is at least 1 version of CCS which does not compute the CRCs inside the CCFG correctly.
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.