Hello Everyone!
My set-up is I connect the SEGGER J-Link plus in raspberry pi 4B 4GB USB Port.
I downloaded the latest software JLink_Linux_V788c_arm.
I follow the procedure in README.txt
--> sudo cp 99-jlink.rules /etc/udev/rules.d/
--> sudo reboot
Then I do this command in the [b]JLink_Linux_V788c_arm folder:[/b]
--> sudo ./JLinkExe
to run the jlinkExe but the output is
--> bash: ./JLinkExe: No such file or directory
Anybody can help me with this? Please!!!!
I'm very new in using SEGGER Jlink in raspberry Pi
I already run the SEGGER Jlink in windows and it's working.
I also check the lsusb command and the SEGGER J-Link is detected and connected.
The problem I think is running the JlinkExe.
Is there any complete procedure in installing the J-Link in raspberry Pi 4?
My set-up is I connect the SEGGER J-Link plus in raspberry pi 4B 4GB USB Port.
I downloaded the latest software JLink_Linux_V788c_arm.
I follow the procedure in README.txt
--> sudo cp 99-jlink.rules /etc/udev/rules.d/
--> sudo reboot
Then I do this command in the [b]JLink_Linux_V788c_arm folder:[/b]
--> sudo ./JLinkExe
to run the jlinkExe but the output is
--> bash: ./JLinkExe: No such file or directory
Anybody can help me with this? Please!!!!
I'm very new in using SEGGER Jlink in raspberry Pi
I already run the SEGGER Jlink in windows and it's working.
I also check the lsusb command and the SEGGER J-Link is detected and connected.
The problem I think is running the JlinkExe.
Is there any complete procedure in installing the J-Link in raspberry Pi 4?