[SOLVED] J-Link v7.88c: cannot flash anymore NXP MIMXRT1052DVL6B with BankAddr=0x60000000&Loader=QSPI

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] J-Link v7.88c: cannot flash anymore NXP MIMXRT1052DVL6B with BankAddr=0x60000000&Loader=QSPI

    Hello, this is related to Case: 60322319.
    After we updated to latest J-Link v7.88c which updated the firmware ("EmuFW = 2023 May 16 10:46") in our J-Trace we cannot flash anymore NXP IMXRT1052 with external QSPI flash.
    The J-Trace is still functioning fine with other HW based on Silabs EFM32GG12 (with internal flash).
    We can still flash the NXP IMXRT1052 with the external QSPI flash using a J-Link Base adapter, for which we didn't update the firmware.
    In the mentioned case we attached logs for both situations (failed J-Trace logs vs successful J-Link Base with the same NXP+QSPI HW): can we get some feedback if this is known and if there is a quick fix how to remediate the situation?
    Thank you,
    Daniel