[SOLVED] Connect to device after Found SW-DP with ID

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] Connect to device after Found SW-DP with ID

    Hi,

    When Connect to device and after JLinkScript, The SW-DP ID is found but failed at power DAP.
    May I know what's "Failed to power up DAP" mean? Or what will the JLink do after Found SW-DP with ID 0x6BA02477 to know how to troubleshooting for this case.

    InitTarget() end
    Found SW-DP with ID 0x6BA02477
    Failed to power up DAP
    Cannot connect to target.

    Thanks.