Hi there, thank you for accepting me into the forum.
I'm having some trouble trying to debug the M7-Cortex of the named chip. The board I'm using is not from NXP and is our own development.
Now I'm using the J-link debugger with gdp to flash bin/elf-files into the M7 and works totally fine. For building I'm using the VS-Code IDE with the cmake-tools extension and the arm gnu gcc compiler using mostly the cmake-files provided by NXP.

Now for debugging it seems that this isn't so easily done:
For the debugging I installed the extension "cortex-debug" from the market place for the VS-Code-IDE. Then I configured the JSON files as in the images, as provided by: wiki.segger.com/J-Link_Visual_Studio_Code [1], [2], wiki.segger.com/J-Link_GDB_Server#-swoport [3]


Now when I click on debug following happens:

The JLinkGDBServer tool opens and I get the message that is connected normally and is waiting for the target.

but then I get timeout... no other errors(see pngs nemed image)...



Now does someone have any clue of what I am doing wrong? Any hints would be very helpful! Thanks!

I actually solved the issue. The problem was that the extensions calls JlinkServerCL but I gave only the JlinkServer as path.