[SOLVED] Unstable debug Connection with MCUXpresso IDE and JLink Plus

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] Unstable debug Connection with MCUXpresso IDE and JLink Plus

    Hello,
    I have a unstable debug connection MCUXpresso IDE and JLink Plus. I have the same behavior on different PCs, USB Cables and JLink Plus. If I switch to MCU-Link than everything works fine. Which lets me rule out a hardware problem.


    Most of the time I get this error:
    "Suspend operation timeout."

    I use the following tool chain:
    J-Link V7.84b
    MCUXpresso IDE v11.7.0 [Build 9198] [2023-01-17]
    On Debian 11 x86 64bit
    MCU NXP K32L2

    I hope someone knows a fix for this problem.


    Thanks a lot and best regards,

    Maximilian
    Images

    • Screenshot_20230309_120058.png

      24.49 kB, 807×293, viewed 196 times

  • Hi Maximilian,
    This is the first time we have heard about such an issue.
    1) Did also turn to the MCUXpresso / NXP forum?
    2) Could you please send us a J-Link log file? How to enable:
    wiki.segger.com/J-Link_DLL#Enable_J-Link_Log_File
    3) Could you please send us a GDB log file?
    wiki.segger.com/J-Link_GDB_Server#-logtofile
    If I remember correctly, the command can be passed via
    Debug Configurations -> JLink Debugger -> Additional Options -> Other server Options:



    BR
    Fabian
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.